|
Title: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: sieniu on June 30, 2018, 09:46:54 AM Hello, i have to calibrate MAF sensor becuse we change intake pipe, old pipe have area 33,51cm2, now is 38,48cm2, so i calculate that is positive change of 14,86%. I've tried to change KFKHFM and KLAF with this procentage change, but with not good results. With every change fuel correction is about +25%.
Can someone help with that? ECU : Audi S3_0261S02721_1037501227_8P0907115AP 0010 Title: Re: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: bzyk77 on June 30, 2018, 12:05:41 PM Make KFKHFM, work perfectly
Title: Re: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: sieniu on June 30, 2018, 01:16:36 PM can you help me with modify KFKHFM ? I tried to do this map also, I've done percentage change for whole map +14,86% and don't have good results. What do you think ? how I have to change this map ?
Title: Re: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: Kacza on June 30, 2018, 02:14:03 PM Is the new MAF housing from any car?
Title: Re: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: sieniu on June 30, 2018, 10:59:20 PM No, the new maf housing is done by us from pipe 70mm
Title: Re: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: gman86 on June 30, 2018, 11:37:46 PM can you help me with modify KFKHFM ? I tried to do this map also, I've done percentage change for whole map +14,86% and don't have good results. What do you think ? how I have to change this map ? If 15% isn't working, try 30%. Once you start to see changes, you'll be able to dial them in and calibrate the table properly Title: Re: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: prj on July 01, 2018, 10:38:31 AM KLAF? I think you have no idea what you are doing :)
Title: Re: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: bzyk77 on July 01, 2018, 11:39:50 AM pass pm
Title: Re: Audi S3 - CDLA - MED9.1 - MAF rescale Post by: Bitshifter on July 02, 2018, 09:59:53 AM There are 2 KF you have to edit: KFKHFM, MSHFMTPH.
My experience: leave it original or take a bigger OEM housing with OEM sensor e.g. from TTS and copy data from this file. |