|
Title: P0601 ME7.5.5 Post by: Barzakov on June 30, 2018, 01:40:28 PM Hi all , today after I write a file with lunch control, the car running several times and then stopped. When i read dtc with vcds it says p0601 checksum error. I flash my stock file with the boot mode but the car did not start again.Someone had a similar problem?
p.s. Sry for my bad english Title: Re: P0601 ME7.5.5 Post by: yxx499 on June 30, 2018, 05:38:14 PM You can search here in forum before posting, will be surprised that other users faced same problem as you and here are also some resolving methods.
Title: Re: P0601 ME7.5.5 Post by: Barzakov on June 30, 2018, 11:43:21 PM I read all post. Their cars are runing after write the stok file but my one does not want it
Title: Re: P0601 ME7.5.5 Post by: Barzakov on July 01, 2018, 01:13:31 AM Ok , i write the stock file and change death code in teh eeprom , car start runing but only one time , after that is the same
Title: Re: P0601 ME7.5.5 Post by: Barzakov on July 01, 2018, 02:18:11 AM This is the eeprom file and ecu file
Title: Re: P0601 ME7.5.5 Post by: Barzakov on July 01, 2018, 06:35:56 AM I need to write eeprom in boot mode?
|