|
Title: 8N0906018CB XDF Post by: littco on January 27, 2012, 02:49:45 AM From the mappack suppiled by TTQs
Pretty much covers everything needed for tuning and DTC deletes Included also is the Original file Eeprom and Imo Delete version of eeprom and copy of winols mappack file Title: Re: 8N0906018CB XDF Post by: carlossus on January 27, 2012, 06:21:56 AM Nicely done :)
Title: Re: 8N0906018CB XDF Post by: littco on February 06, 2012, 03:22:02 AM Updated version includes
SAI AND EVAP DELETE CDSLS CLASLVE CLASLPE CDTES CDLDP - CLATEVE - CLALDPE - For launch CWNMAXMD VNMX DNMAXH ITNMXH NMAX NMAXOG TMOTNMX TNMXH Title: Re: 8N0906018CB XDF Post by: koskotas on February 20, 2012, 03:53:52 AM that nice work !
My ECU number is 8N0906018H 0261206795 360313. The xdf will work also ? or the last letter make different ? Title: Re: 8N0906018CB XDF Post by: littco on February 20, 2012, 03:22:25 PM BH is slightly different however the CB will run on the BH so you could just load that onto your ecu and then use the xdf. I'll have a look at the BH see if it's much different .
Title: Re: 8N0906018CB XDF Post by: nokiafix on February 27, 2012, 01:00:41 PM Awesome work!! ;) Its nice to have a tuning forum where people are willing to help and share.
Title: Re: 8N0906018CB XDF Post by: Yorl on March 09, 2012, 11:49:32 AM I have a K SW. Have you ever tried this? Will the .xdf file work??
Title: Re: 8N0906018CB XDF Post by: littco on March 09, 2012, 12:22:40 PM 6018k ie ecu from apy s3
This won't work unfortunately on that ecu but I am nearly there with a def file for the 6018n and k. Title: Re: 8N0906018CB XDF Post by: littco on March 09, 2012, 02:22:13 PM Just realised its an 8n not 8l do it's an TT.
Title: Re: 8N0906018CB XDF Post by: carsey on June 16, 2013, 09:34:46 AM Just had a look at this and wondered if the RPM rows were correct on this?
(http://i93.photobucket.com/albums/l42/carsey2006/lamfa.jpg) Also, does anyone know why tunerpro cuts the first digit off the columns on the left? Even increasing the window size doesnt allow it to show. Title: Re: 8N0906018CB XDF Post by: vdubnation on June 16, 2013, 10:04:05 AM Just had a look at this and wondered if the RPM rows were correct on this? (http://i93.photobucket.com/albums/l42/carsey2006/lamfa.jpg) Also, does anyone know why tunerpro cuts the first digit off the columns on the left? Even increasing the window size doesnt allow it to show. somethings off there Title: Re: 8N0906018CB XDF Post by: fknbrkn on July 30, 2013, 05:33:43 PM Also, does anyone know why tunerpro cuts the first digit off the columns on the left? Even increasing the window size doesnt allow it to show. decrease significant digits in rows & columns tabs in 'edit parameter XDF info' and you will see first digit Title: Re: 8N0906018CB XDF Post by: carsey on July 31, 2013, 04:28:12 AM decrease significant digits in rows & columns tabs in 'edit parameter XDF info' and you will see first digit Awesome thanks :D |