|
Title: mk5 cluster swap question Post by: birchbark506 on July 30, 2018, 05:15:54 PM i have an immo off ecu i also have an extra cluster, i instlled it the other day and the car was able to start and run and drive, the only issus i had was that it would stay saying immo active and the MFD wouldn't read but everything else would. can vcds code it in or do you have to use odis or some other tool?
Title: Re: mk5 cluster swap question Post by: dunt on July 31, 2018, 03:30:03 AM learn keys to cluster and the message disappears. ;)
rgds Title: Re: mk5 cluster swap question Post by: birchbark506 on July 31, 2018, 07:58:53 AM Only able to relearn it with odis? And vcds with skc code is that correct?
Title: Re: mk5 cluster swap question Post by: dunt on August 02, 2018, 07:11:03 AM yes ODIS online or VCDS or somthing else with SKC. But if Keys neverer learned to this cluster they must be prepared for this cluster.
Title: Re: mk5 cluster swap question Post by: birchbark506 on August 02, 2018, 07:57:28 AM Okay I dont have skc code for used cluster but I have access to odis online
Title: Re: mk5 cluster swap question Post by: birchbark506 on August 07, 2018, 06:41:38 AM I tried odis online and I didnt have any luck, my ecu is immo deleted and it still shows immo actived is there away to code it or am I missing a step with odis online
Title: Re: mk5 cluster swap question Post by: H2Deetoo on August 20, 2018, 06:52:20 AM If you now have a cluster with red LCD I can't help, but if you change it to one with black/white LCD then it's possible to configure the cluster so immo is disabled.
Big chance this is also possible for red LCD clusters but I never bothered to work it out. Title: Re: mk5 cluster swap question Post by: birchbark506 on August 20, 2018, 03:42:48 PM The cluster I have is the red led highline one
Title: Re: mk5 cluster swap question Post by: eliotroyano on August 20, 2018, 06:17:01 PM I tried odis online and I didnt have any luck, my ecu is immo deleted and it still shows immo actived is there away to code it or am I missing a step with odis online I will try to immo on ECU, get SKC or PIN and attemp to adapt new cluster. Title: Re: mk5 cluster swap question Post by: birchbark506 on August 21, 2018, 02:47:31 AM How would I get skc from the cluster, only have odis and vcds atm
Title: Re: mk5 cluster swap question Post by: H2Deetoo on August 21, 2018, 05:38:24 AM You need a proper cluster tool like AVDI, VVDI, FVDI, CARPROG, VACHTAGO, SMOK.
You cannot use VCDS nor ODIS to extract PIN (SKC). Title: Re: mk5 cluster swap question Post by: birchbark506 on August 21, 2018, 04:58:15 PM That is what I thought, I havent looked in to them cables much as of yet, what is the best one out of them all,
Title: Re: mk5 cluster swap question Post by: H2Deetoo on August 23, 2018, 02:01:21 AM None is the best, they all have issues/problems/bugs/limited support.
Sorry. Title: Re: mk5 cluster swap question Post by: terok on September 13, 2018, 04:04:23 AM Key adaptations usually don't work with Odis, if you have immo-off'd ecu. Undo that and you are rock'n'roll.
Title: Re: mk5 cluster swap question Post by: birchbark506 on September 13, 2018, 05:01:09 AM yes that i do know of, and i am immo deleted, i have to use the extra ecu i have with immo still enable and just haven't had the time to test
|