|
Title: MED 9.1 Bootmode Activation and Bench Flashing harness Post by: JBL20 on August 05, 2018, 10:00:41 AM Hello guys.
I want to flash a MED 9.1 ECU on my workbench. Now I have 2 questions: - How can I start the bootmode on MED 9.1 ECUS? - Wich resistors do I need for Bootpin, Clamp 15 and Clamp 30 ? I hope for your help :) Title: Re: MED 9.1 Bootmode Activation and Bench Flashing harness Post by: gman86 on August 05, 2018, 06:50:11 PM Hello guys. I want to flash a MED 9.1 ECU on my workbench. Now I have 2 questions: - How can I start the bootmode on MED 9.1 ECUS? - Wich resistors do I need for Bootpin, Clamp 15 and Clamp 30 ? I hope for your help :) There is no MED9 boot mode; it's BDM. Title: Re: MED 9.1 Bootmode Activation and Bench Flashing harness Post by: yxx499 on August 05, 2018, 07:01:46 PM Solder BDM pads permanently to the ecu board is the fastest way i think.
Title: Re: MED 9.1 Bootmode Activation and Bench Flashing harness Post by: prj on August 05, 2018, 11:45:57 PM Solder BDM pads permanently to the ecu board is the fastest way i think. You should never solder BDM pads ever. |