|
Title: Galletto "boot mode inactive" error ME7.3.1 Post by: botasky on August 09, 2018, 02:21:30 AM Hi, I'm trying to read a flash from Alfa Romeo 147 2.0TS me7.3.1 ecu with the Galletto cable, but I got "boot mode inactive" when I start reading, I can read the EEPROM with the me7 EEPROM tool and the same galletto cable, if anyone has experienced this problem or know how to read Alfa Romeo ME7.3.1 flash please help, Thank you.
Title: Re: Galletto "boot mode inactive" error ME7.3.1 Post by: nyet on August 09, 2018, 09:21:27 AM What have you tried to get it into bootmode?
Title: Re: Galletto "boot mode inactive" error ME7.3.1 Post by: Skybroi on March 20, 2019, 02:07:04 PM pin 20 to mass for boot mode
Inviato dal mio KT107 utilizzando Tapatalk Title: Re: Galletto "boot mode inactive" error ME7.3.1 Post by: nyet on March 20, 2019, 02:20:12 PM holding it there? how long? while powering up? release before reading?
Be specific. Title: Re: Re: Galletto "boot mode inactive" error ME7.3.1 Post by: Skybroi on March 20, 2019, 09:35:05 PM holding it there? how long? while powering up? release before reading? Holding, power up, read, turn off, Power up holding, write Be specific. Title: Re: Galletto "boot mode inactive" error ME7.3.1 Post by: nyet on March 20, 2019, 10:23:28 PM You have to release before doing read
Title: Re: Galletto "boot mode inactive" error ME7.3.1 Post by: overspeed on March 21, 2019, 12:57:30 PM On me3.1 (use same protocol afaik) you shall keep it grounded.
|