|
Title: Overrun switchable - Is this possible? Post by: vara82 on August 11, 2018, 06:31:04 AM Hey Guys...
Since a long time ago i drive around with my tuned map added launchcontrol with the script from this forum... It runs very fine for more than 100km a day... I´ve two Maps: One with LaunchControl only and one with additional Pops&Bangs in Overrun. So i´m flashing these two Maps if i want Pops&Bangs or not... Now i´ve heared that it´s possible to switch overrun on and off... With A/C Switch or with Cruise Control Stalk... A/C on: Pops&Bangs enabled A/C off: Pops&Bangs disabled or with Cruise Control switch on and off... I want to try to make this with my Map so i don´t have to flash my Maps anymore... Can someone give me a hint how this can works?! I would be very happy if someone can help me... Thanks a lot, Flo Title: Re: Overrun switchable - Is this possible? Post by: nyet on August 11, 2018, 09:24:25 AM You'll have to learn assembly.
Title: Re: Overrun switchable - Is this possible? Post by: cherry on August 11, 2018, 10:52:05 AM Search map for overrun in case of a/c switched on, in MED9.1 it´s available for sure. It makes sense because a/c compressor have a load too, this is why idle speed is higher too. So if you write high values to this map you have 2 different rpm where overrun is active or not when a/c is active or not...
|