|
Title: RPM Cut at 6,600RPM - Can't fix HELP Post by: ibizaCUPRA18t on August 14, 2018, 09:30:25 AM Hi guys, been having a weird issue on this 018H 1.8T BAM Stage 2+ car. NMAXOG, NMAX and all RPM limit related soft cuts are set to 7000-7200RPM. However, the car keeps cutting at 6,600rpm while flooring it and even while stationary, at low load. All hardware is perfect no issues whatsoever.
Can one of you do me a favor and check the file for me, as I can't find which map is making it do this. It feels like a hard-limiter too. Thanks. File is 018 H part number from BAM 225 Hp ver. 0004. Title: Re: RPM Cut at 6,600RPM - Can't fix HELP Post by: nbdiy on August 15, 2018, 03:51:04 AM I´ve took a look... 1F488-1F496: 6800rpm maybe?
And then there is 13F5E: 7100rpm Title: Re: RPM Cut at 6,600RPM - Can't fix HELP Post by: ibizaCUPRA18t on August 15, 2018, 08:13:12 AM I´ve took a look... 1F488-1F496: 6800rpm maybe? And then there is 13F5E: 7100rpm Hmm.. which maps are those? Can you edit every RPM limiting map to 7200 and check KFTSRL for me as I don't have a address for it. Send me a copy with edits so I can try. Or if there isn't any conversion factor I'll do it myself with those addresses. |