|
Title: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: Gulfstream on September 02, 2018, 06:48:26 PM Hi everyone!
I need a help here! Is the second time that my ECU was block. After i write a new file to ECU, the engine not starts, and i can't write a new file with MPPS. It occours in the past, in many times i just have to wait 10 minutes to write again, but now, i wait 30 minuts and not works! What i have to make to solves it? Thanks! Title: Re: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: Carsinc on September 03, 2018, 09:25:16 PM that sounds like a brick not a block, look up brick here
Title: Re: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: vwaudiguy on September 03, 2018, 10:08:42 PM Post the file that bricked the ecu.
Title: Re: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: Gulfstream on September 05, 2018, 02:42:39 PM Post the file that bricked the ecu. Its a file that not was fix in Me7sun.exe! I always write the "out.bin" file, but in the last time i select a file unfixed! Much hurry make this error! When this occours, i disconnect the barety per 10 minutes and all back works again, but its the second time thats the ECU dont give access to wirte a new file after this error! Title: Re: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: Gulfstream on September 05, 2018, 02:43:47 PM that sounds like a brick not a block, look up brick here Occours after a unfixed checksun file Title: Re: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: Gulfstream on September 05, 2018, 02:44:37 PM Post the file that bricked the ecu. was a unfixed checksum file! Title: Re: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: Carsinc on September 05, 2018, 09:20:30 PM Sooo get a mpps cable and bootmode that bad boy, i only say mpps because galetto is same price these days and mpps clones are pretty good at
this point. Title: Re: Passat V6 - ME7.1 - 3B0 907 551 CJ / 0 261 207 466 Post by: Gulfstream on September 11, 2018, 08:23:29 PM Sorry for delay!
I use MPPS, i try with boot mode MPPS and Galleto and not works! When i try to wirte or read with MPPS say "ECU Not FOund"! Its occours because i write a wrong file! I need to found a way to erase this wrong file and write the correct file! Title: Re: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: Carsinc on September 11, 2018, 09:57:12 PM Do You have a copy of your eeprom? I have had a ecu I had to write the eeprom with bootmode new before i could bootmode the eprom,
Also if you want you can just ship me the ecu and ill fix it, i may have a spare in my bin Title: Re: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466 Post by: Gulfstream on September 12, 2018, 01:37:21 PM Do You have a copy of your eeprom? I have had a ecu I had to write the eeprom with bootmode new before i could bootmode the eprom, Also if you want you can just ship me the ecu and ill fix it, i may have a spare in my bin I will try one more time with bootmode and galleto. I will post the results soom! Thanks! |