|
Title: Overboost software/hardware issue? Post by: loseisimprove on September 03, 2018, 06:37:26 AM Hi i got a4 b5 after me 3 to 7.5 conversion i run with hybrid turbo and AEB n75 (same part number) i got huge overboost, what is the problem software/hardware. On stock soft is the same just a lil bit less, in this screen i just up LDRNX. Any tips?
Title: Re: Overboost software/hardware issue? Post by: aef on September 03, 2018, 08:02:30 AM Software does not fit hardware.
Is your engine 1:1 identical to the one where the me7 file is from? same turbo? Reduce ldrxn and/or duty Title: Re: Overboost software/hardware issue? Post by: fknbrkn on September 03, 2018, 10:04:00 AM kfldimx / kfldrl and other PID stuff should be calibrated for hybrid turbo
Title: Re: Overboost software/hardware issue? Post by: loseisimprove on September 04, 2018, 08:24:09 AM its good idea to start with BEX pid tables? I got AWT harness
Title: Re: Overboost software/hardware issue? Post by: nyet on September 04, 2018, 08:31:24 AM Reduce ldrxn That will make the boost deviation worse. Title: Re: Overboost software/hardware issue? Post by: loseisimprove on September 05, 2018, 12:18:29 AM Ok i want use a tool made by SB_GLI but i have some question i know i have to set cwdrapp to 8 and edit kdldrapp but i dont know i think the right way, i attache image with my idea tell me i have right or no. So i have to make 10 soft and make 10 logs right? Then program will generate proper KDLDRL and KFLDIMX?
Offtop where i can buy premium nefmoto flasher cuz now i do 1 flash over 3 minutes sometime disconect and this all could take so much time. Title: Re: Overboost software/hardware issue? Post by: nyet on September 05, 2018, 08:50:29 AM Offtop where i can buy premium nefmoto flasher cuz now i do 1 flash over 3 minutes sometime disconect and this all could take so much time. http://nefariousmotorsports.com/forum/index.php?topic=12861.msg105960#msg105960 |