|
Title: Audi S3 APY - Problem with Boost Request Post by: error1997 on September 04, 2018, 01:37:47 PM The car is Audi S3 ECU 8L0906018K 352377
Turbo T3/T4 injectors Siemens Deka 630cc , 4bar FPR ,stock MAF The problem is that when you go WOT in higher gear than 4th , the boost request stays at 1800-2000 from 3000 to 4500 and then goes to the desired by me 2500mbar . If you go WOT from second or third , no problem with boost request . I will attach a graph for easier understanding , did not make logs because I though , I will figure this myself , how saucy heh . I checked : Torque request - 100% Requested load - stays at diagnostic limiter of 191% Requested load before corrections - stays at diagnostic limiter of 191% Coolant temp - 90-92 C IAT < 50 C Ignition retard - none or 1.5 deg AFR stays as tuned around 12:1 Then opened a damos and searched through "LDRLMX: 3.20 calculation LDR maximum filling rlmax" Disabled all corrections (set them to 1) - nope ,they correct requested load not boost Disabled KFLDHBN(set it to 4 bar) - the problem isn't there LDPBN - set to 2550 from stock I attach the graph , ori , and the latest .ols Would be happy if someone could give me a push . Thank you beforehand . Title: Re: Audi S3 APY - Problem with Boost Request Post by: nyet on September 04, 2018, 02:55:42 PM Please obey forum rules.
Moved. http://nefariousmotorsports.com/forum/index.php?topic=12361.0title= Title: Re: Audi S3 APY - Problem with Boost Request Post by: error1997 on September 04, 2018, 04:10:04 PM Oh f**k I though I have done that already
Title: Re: Audi S3 APY - Problem with Boost Request Post by: aef on September 05, 2018, 04:38:30 AM add log, not graph
|