NefMoto

Technical => NefMoto Software => Topic started by: v8boy on September 11, 2018, 01:03:57 AM



Title: Audi S4 2005 ME7.1.1
Post by: v8boy on September 11, 2018, 01:03:57 AM
Hi Guys,

can i read with Nefmo my S4 ECU? And flash a new stock file?

I have Error :
16985
p0601 - 001 cheksume

I‘ve found a stock Bin of my SW
8H0 910 560 J

Thanks in advance


Title: Re: Audi S4 2005 ME7.1.1
Post by: Risky on September 11, 2018, 08:20:29 PM
If you flash the stock file with nefmoto it should work.


Title: Re: Audi S4 2005 ME7.1.1
Post by: Black_A4 on September 12, 2018, 11:28:14 PM
Could you upload your the stock bin you have found?


Title: Re: Audi S4 2005 ME7.1.1
Post by: nyet on September 13, 2018, 10:28:52 PM
Nef might not work with that if it is ST10


Title: Re: Audi S4 2005 ME7.1.1
Post by: v8boy on September 18, 2018, 12:32:04 PM
what software weorks with ST10?


Title: Re: Audi S4 2005 ME7.1.1
Post by: SB_GLI on September 18, 2018, 12:55:47 PM
cracked/free?  galletto in boot mode


Title: Re: Audi S4 2005 ME7.1.1
Post by: v8boy on September 18, 2018, 03:34:38 PM
mpps dont work?


Title: Re: Audi S4 2005 ME7.1.1
Post by: Carsinc on September 18, 2018, 10:48:05 PM
mpps does work


Title: Re: Audi S4 2005 ME7.1.1
Post by: v8boy on September 19, 2018, 11:57:32 AM
with this http://diag.lauter-bg.com/diagnostic-equipment-shop/#!/USB-Interface-MPPS-K-CAN-V-16/p/48083085/category=6816759 (http://diag.lauter-bg.com/diagnostic-equipment-shop/#!/USB-Interface-MPPS-K-CAN-V-16/p/48083085/category=6816759)
i should be able to make a dump via obd?


Title: Re: Audi S4 2005 ME7.1.1
Post by: Carsinc on September 20, 2018, 09:44:35 PM
There are much cheaper options on ebay, but sure that works.


Title: Re: Audi S4 2005 ME7.1.1
Post by: v8boy on September 21, 2018, 08:44:04 AM
Carsinc
do you have a link 4 me?


Title: Re: Audi S4 2005 ME7.1.1
Post by: Carsinc on September 23, 2018, 10:46:36 PM
I said mpps, i'll say v16.


Title: Re: Audi S4 2005 ME7.1.1
Post by: _nameless on September 29, 2018, 06:17:58 AM
I said mpps, i'll say v16.
v18 is the best clone v16 sucks and is unstable  /  crash


Title: Re: Audi S4 2005 ME7.1.1
Post by: RBPE on September 29, 2018, 07:38:40 AM
As above......

http://www.autoobdshop.co.uk/wholesale/mpps-v18-main-tricore-multiboot-with-breakout-tricore-cable-support-multi-language.html?gclid=EAIaIQobChMI6du6ibjg3QIVa77tCh3zFwdiEAQYASABEgLxXPD_BwE

Check your car here for suitability

https://www.eobdtool.co.uk/upload/pro/mpps-v18-car-list-software-v18-12-3-8.pdf


Title: Re: Audi S4 2005 ME7.1.1
Post by: nyet on September 29, 2018, 01:05:00 PM
Also I hate to be a buzzkill but that motor isn't worth any effort to tune.


Title: Re: Audi S4 2005 ME7.1.1
Post by: _nameless on September 29, 2018, 03:32:32 PM
Also I hate to be a buzzkill but that motor isn't worth any effort to tune.
he has a checksum issue and is trying to reflash back to stock. not exactly tuning


Title: Re: Audi S4 2005 ME7.1.1
Post by: v8boy on October 07, 2018, 10:59:03 AM
he has a checksum issue and is trying to reflash back to stock. not exactly tuning
correct!
mppsv16 does not work on a vmare win xp? im getting a error with the loader


Title: Re: Audi S4 2005 ME7.1.1
Post by: _nameless on October 11, 2018, 08:32:11 PM
correct!
mppsv16 does not work on a vmare win xp? im getting a error with the loader
I've never had too much luck with 16. It's unstable , crashes and has failed writes from my experience with it. Version 13 and 18 are your best bet


Title: Re: Audi S4 2005 ME7.1.1
Post by: Kompiesto on November 21, 2018, 12:05:48 AM
From my experience, best for st10 by obd is Kess cable. Mpps v13 can program in bootmode but no do checksums. I not tested galletto.


Title: Re: Audi S4 2005 ME7.1.1
Post by: v8boy on January 20, 2019, 01:31:54 PM
i've bought a used ECU, identical p/n.
Does the Super Vag K+ Can Diagnosis V4.8 read the login codes?


Title: Re: Audi S4 2005 ME7.1.1
Post by: Kacza on January 21, 2019, 03:06:22 AM
From my experience, best for st10 by obd is Kess cable. Mpps v13 can program in bootmode but no do checksums. I not tested galletto.
Does Kess after OBD correctly calculate checksums for ME7.1 ST10?


Title: Re: Audi S4 2005 ME7.1.1
Post by: Kompiesto on January 21, 2019, 06:01:56 AM
My Kess calculate correct checksum. Some people says me that, they had problems, bricked ecu. If You use china copy, its some risk.