NefMoto

ECU Files => ECU Definition File Requests => Topic started by: amd is the best on February 02, 2012, 06:19:19 PM



Title: XDF Request: 06A906032NK
Post by: amd is the best on February 02, 2012, 06:19:19 PM
Looking for an XDF definition file for an 04 Jetta 1.8T with the ECU code 06A906032NK (06A-906-032-NK).

Thanks in advance,
Nick


Title: Re: XDF Request: 06A906032NK
Post by: amd is the best on February 07, 2012, 08:02:48 AM
I have the stock bin file if it'll help.  Anyone?


Title: Re: XDF Request: 06A906032NK
Post by: littco on February 07, 2012, 04:22:21 PM
Post it up. Just wondering if the 032hn is similar enough to run on your ecu and if so there's a damos for that image. Might be worth a try.


Title: Re: XDF Request: 06A906032NK
Post by: amd is the best on February 07, 2012, 05:52:55 PM
File is attached.


Title: Re: XDF Request: 06A906032NK
Post by: littco on February 08, 2012, 05:25:16 AM
I had a quick look I definately think it's worth trying the flash from the 032HN. A because I think it might just work for you and secondly there is a Defination file available for the HN on here.

If you flash the file and it fails you can at least just flash it back to standard. I would personally get a copy of the eeprom as well just in case you get a DTC which wont start the car, you can then just put it back to identically the same as it was before you started.

obviously do this at your own risk. ;-)


Title: Re: XDF Request: 06A906032NK
Post by: amd is the best on February 08, 2012, 05:07:14 PM
I am not familiar with obtaining the eeprom file.  Would you be able to elaborate on this process?  Also, I believe this car has an immobilizer.  Will that have any affect on performing these procedures?

Thank you for your help!


Title: Re: XDF Request: 06A906032NK
Post by: carlossus on February 08, 2012, 11:49:55 PM
I just saw this http://nefariousmotorsports.com/forum/index.php?topic=1511.msg14380#msg14380

The HS was also used on the Jetta and that has certainly been sucessfully flashed with HN with no issues reported.

As for the EEPROM / immo, you can use argdub's tool to read it but you shouldn't need to do anything - it is likely to work with the new flash image. The risk isn't 0 though :)


Title: Re: XDF Request: 06A906032NK
Post by: modzila on February 14, 2012, 05:16:26 PM
I had a quick look I definately think it's worth trying the flash from the 032HN. A because I think it might just work for you and secondly there is a Defination file available for the HN on here.

...

obviously do this at your own risk. ;-)

I was wondering where I could find the definition file for the 032HN.  (search only returns my own post)