|
Title: Flashing ECU Audi A4 after Multitronic swap to manual gearbox Post by: DenisA4 on October 18, 2018, 09:33:57 AM Hi! Need your help. I have Audi A4 B6 2001 AMB 170HP (from USA)
How to flash ECU after multitronic swap to manual gearbox? Wich ECU File to flash? Title: Re: Flashing ECU Audi A4 after Multitronic swap to manual gearbox Post by: macxxx on October 19, 2018, 08:58:13 AM Search in etka for the right number , but post your actual ecu number
Title: Re: Flashing ECU Audi A4 after Multitronic swap to manual gearbox Post by: _nameless on October 19, 2018, 09:33:29 AM Search in etka for the right number , but post your actual ecu number b6 have variant coding so you dont need to reflash just change softcoding with vcds. make sure you unplug the trans control module otherwise it wont accept coding Title: Re: Flashing ECU Audi A4 after Multitronic swap to manual gearbox Post by: macxxx on October 19, 2018, 12:26:49 PM Usually multronic in a6 c5 and a4 b6 have soecific ecu for it - they dont accept codind to manual gearbox
Ecu AMB for multi 8E0909518G Ecu AMB for manual 8E0909518F Title: Re: Flashing ECU Audi A4 after Multitronic swap to manual gearbox Post by: k0mpresd on October 19, 2018, 06:04:19 PM Ecu AMB for multi 8E0909518G Ecu AMB for manual 8E0909518F the 2002 usa version b6 ecu does not recode. the codings are specific to the software number. the above posted numbers are correct. 518F codings: 16001 16201 16501 16701 16004 16204 16504 16704 16751 16754 so 2 tiptronic codings are accepted. 51 and 54. all others are 5spd manual codings, as this is a 5spd manual specific software. 518G: 16581, this is the only accepted coding. CVT only. 518AK for example, accepts all variants: 16001 16201 16501 16701 16004 16204 16504 16704 16751 16754 16581 16584 16011 16211 16511 16711 16014 16214 16514 16714. Title: Re: Flashing ECU Audi A4 after Multitronic swap to manual gearbox Post by: DenisA4 on February 06, 2019, 09:12:06 PM Thank you, guys! I load 8E0909518F and now everything work fine.
|