NefMoto

General => General Discussion => Topic started by: Gulfstream on October 18, 2018, 08:35:02 PM



Title: Adjust TEMIN and FGATO with Turbocharger on 1.8 20v
Post by: Gulfstream on October 18, 2018, 08:35:02 PM
Hi!!

TENIN on my file is 006F1A, anybody can help me to found TENINVA?

My original fuel injectors are 190cc, but now i use a 550cc.

In the past, when the engine is aspirare, i reduce 45% on FGATO to equalize the mixture (0.87v final result). Its ok.

But now i put a turbocharger, to found the ideal mixture in WOT with 0.7bar, i have to increase the FGATO. (i will change for 0.92v with turbo). Its ok.

But now, for equalize the idle mixture and low pedal charges, is just adjust the TEMIN? Or have to adjust the TVUB too?


Title: Re: Adjust TEMIN and FGATO with Turbocharger on 1.8 20v
Post by: ulek3pl on March 26, 2019, 05:23:17 AM
Fgat0 for injector scale, kflf for fuel at wot.


Title: Re: Adjust TEMIN and FGATO with Turbocharger on 1.8 20v
Post by: cessnas on March 26, 2019, 05:44:45 AM
Should not have to change TEMIN, TEMINVA on the Bosch 550cc.
Adjust KRKTE and TVUB and idle should be good.


Title: Re: Adjust TEMIN and FGATO with Turbocharger on 1.8 20v
Post by: Blazius on March 26, 2019, 05:41:44 PM
Fgat0 for injector scale, kflf for fuel at wot.


TVUB and krkte, and temin etc if u have issues after that . KLFL is for part load, you can use lamfa though, since N/A doesnt have BTS.


Title: Re: Adjust TEMIN and FGATO with Turbocharger on 1.8 20v
Post by: ulek3pl on March 27, 2019, 02:45:18 PM
there is no lamfa and krkte.