|
Title: Lanch control and antilag ME7.5 1.8T s3 Amk 210hp Post by: drews3 on October 31, 2018, 12:10:53 AM Hello people
So i searched a bit of time for the antilag function and after some time i found it and i saw it is usable in me7.5 the point is i have found the function i have implemented it in my file now i writted it with kess and locked the ecu :'( so i took it down and gooing to writte it on bench now my question is my tool blocked the ecu or i done somthing wrong on the file ... however here it goes -The condition is located at adress: 17e00 A6 01 50 46 0A 00 F0 55 E6 FF FF FF FF FF FF FF -The function is located at adress: 0A6100 9A 2B 13 80 F2 F4 40 8E D7 00 81 00 F2 F9 00 7E 40 49 9D 0B F2 F4 7A F8 D7 00 81 00 F2 F9 02 7E 40 49 FD 03 F7 8E AC 8D 0D 2F 9A 2B 29 80 8A 2B 22 60 F2 F4 7A F8 D7 00 81 00 F2 F9 06 7E 40 49 FD 1A C2 F4 02 8B D7 00 81 00 C2 F9 08 7E 40 49 FD 12 D7 00 38 00 F2 F4 F0 4F D7 00 81 00 F2 F9 04 7E 40 49 9D 11 F7 8E AC 8D 08 41 D7 00 38 00 F7 F8 F0 4F 0D 09 D7 00 38 00 F6 8F F0 4F 0D 04 D7 00 38 00 F6 8E F0 4F F3 F8 F3 8A DB 00 FF FF -Searched at end of the file D7 40 06 02 03 F8 and added my recal for the function it was added before "DA 81 00 6A-here i recalled my function" adress adress 9DD50 what i done wrong was fault of my file or fault of my tool kess asked me the oem file for compare so i think is fault of my kess but maybe i missed something in the file :\ in attachment the oem file withstage1 and the modified file i used winols to mdoify the file . if somone can give me a finger(because i want to understand what i done wrong and what i done right) not a hand ;D i would be happy to pay him a beer :) Title: Re: Lanch control and antilag ME7.5 1.8T s3 Amk 210hp Post by: drews3 on November 01, 2018, 01:33:37 AM still have long way to go
Title: Re: Lanch control and antilag ME7.5 1.8T s3 Amk 210hp Post by: Kompiesto on November 05, 2018, 06:18:13 AM You dont undrestand what you are doing....
You cant copy and paste code dedicated for S4 Mbox (7.1) to S3 (7.5) ecu. Code can work but all needed variables is in different locations. You must find variables in your file and modify pasted code. Kess working properly. Kess compare ori file to calculate checksum. Now only way to get working your car is write ori flash in bootmode. Title: Re: Lanch control and antilag ME7.5 1.8T s3 Amk 210hp Post by: Dejw0089 on November 15, 2018, 11:24:52 AM I has amk leon and you cant only change call function. You must change main function too witch correct adress for variables etc
|