|
Title: ME7.1.1 and MPPS V18 Clone Post by: hummel on November 05, 2018, 10:51:27 AM New day, new problem.
I am really struggling with my ECU. At first I tried to read EEPROM to get Immo Off, couldn't read it with ArgDub tool or Vag Commander. So I got the EEPROM desoldered and a a local dealer could fix it with a burner. So now I try to connect and read the flash. I tried with NefMoto but couldn't. Then i ordered a MPPS V18 clone on Ebay, it has the ME7.1.1 R32 in the menu, so i figured it would do it, but I couldn't, it says security access and after that timeout... I believe it has the ST10 chip, should I be worried that I might lock the ECU, I read somewhere that this ECU is a bit of a nightmare ? Or is that wrong ? Is there any other way I can read/write with my newly bought MPPS V18 clone ? Title: Re: ME7.1.1 and MPPS V18 Clone Post by: Kacza on November 05, 2018, 02:51:27 PM http://nefariousmotorsports.com/forum/index.php?topic=15146.0
Title: Re: ME7.1.1 and MPPS V18 Clone Post by: hummel on November 06, 2018, 12:00:41 AM Yes, I already read that thread, but as that was a question regarding k-tag I didn't thought I could use the information for reading with MPPS.
My disc is like Family 539 or HW III Family 53 (They seems the same?). I can get it to bootmode with a 1K ohm resistor to CNF1 and grounding boot pin for 3 sec. I will try to read via can connection, and later in boot mode as last option, but i'm a bit affraid to lock the ECU ? Should i be? ??? Title: Re: ME7.1.1 and MPPS V18 Clone Post by: staffordshire on November 13, 2018, 02:58:28 PM Hi,
Mk4 of mk5 Ecu? They looks the same but, Only the outside the processor is changed from 20mhz to 40Mhz This is the trick for mk5 ecu Title: Re: ME7.1.1 and MPPS V18 Clone Post by: hummel on November 14, 2018, 12:29:20 PM Thanks, I solved the issue by reading the file via CAN.
|