NefMoto

General => Introductions => Topic started by: JulienR on November 21, 2018, 03:03:39 PM



Title: JulienR from the netherlands
Post by: JulienR on November 21, 2018, 03:03:39 PM
Hello,

my name is Julien, im a car mechanic, registered to this forum to learn more about me7 ecu's.
the reason for that is a once had a mk4 with me3.83 ecu(agu) where i got interested in to get tuned but what was a bit difficult to read/write and tune myself because it was less accesible than an me7 ecu(difficult to get damos etc), so my interest of tuning it was a step to big, so i let it go.
after a year riding a passat 2.8 v6 and got a bit bored because i didnt get use to a v6 non turbo i bought an mk4 with aum and me7 ecu.
recently i found out that an me7 ecu is more accesible to read/write and tune , and found this forum.

so im again at the same point ...interested about how to tune , read/write this to improve better specs of the engine and maybe help some other contacts/clients with a better driving improvemend on their 1.8t's




Title: Re: JulienR from the netherlands
Post by: sandor1987 on November 22, 2018, 01:48:49 PM
welcome!

enough to learn here ;)


** welkom, je kunt hier genoeg leren. veel lees plezier! **