NefMoto

hi guys how are you? aver my question is that the ecu 06A906018R read and I found the problem that I detected no winools map in the resulting binary check reading with monoscan!
 thank you very much if someone throws an aver pokito light on this issue ...

 here you have the file for you to take a look

This is the EEPROM of the ECU, there are no maps to tune in there.

and in the EEPROM are not the maps? then where are they? please a little help I've also read the eprom and ram the attachment here you also for you to take a look!
 thanks for answering
 a greeting

hi guys here you have the RAM

all maps in the psop 44 29f200 :-)

all maps in the psop 44 29f200?

if you 29f200ab in the eprom but then the file that I have read is not valid? aver as you read you memory stick out? thanks aver if someone helps me

in the eeprom is the immo no maps for tun :-) in the Flash memory all maps you need :-) .Make a picture from open ecu .

 in the Flash memory all maps you need :-) .Make a picture from open ecu ?

I do not understand and then as you read the flash? I have read with monoscan
 thanks for answering so fast

Desolder the flash . read out with Batronix or galepp, Change maps make chk and write back to flash and solder :-)

i hope your ecu is a test ecu

then you can not have spoken acer obd have read in some forums that you can not read, but if you write a small modification mpps 12v operation must be in writing, ecu pin 43, or 13 obd you know something about this?
 I talked to a chipturner my friend told me that we must bring the ECU ace but not ace lack desoladar memory!
 you know some of this
 again thank you very much

sorry i have no mpps . Only cmd and Byteshooter .

I have a mpps the problem is that not only writes ECU reads this with a small modification! as I 5.9.2
 you know of any program type vag, vagme7.5

 then your opinion is to unsolder put a socket and replace 29f200ab

 thanks a warm greeting

hi guys thank you very much indeed for the file aora winools am with, I will use the file provided for you to modify maps and upload them to my ecu with mpps v12, bequeath my franken turbo soon
 I have a win!
 you ire reporting

 thanks for all
 a greeting

hello good afternoon guys, I have some trouble identifying some aver map if anyone can help me!
 here you have the maps that I detected winols ..
 I do not identify such forward on the map and fuel mixture
 I have several file descriptors identifiers but these did not appear help please

 thanks a warm greeting

Hello,

With what software is this .odt file made/viewable ?

Hi good afternoon, thanks for answering me pvl you said in another post to look for your posts
I find the information!
If I could give another clue .....
jajajajajajaj

 I have 2 doubts file descriptors degree I find these units and% dk, dk degree can be? progress on? probe lambda%?

teachers a little help please!

otherwise I'm also using winools disposal, ecm 2001 seems to show me several options more understandable
is also correct to use this program?

thanks a Greeting

hi again guys a question there any way to do a reading of the flash memory of the ecu?
 writing how to do it already, I've read by ai may be that with the car running?

 preguntilla certainly a more .. This file holds for my ecu?
 to modify the file I attached
 if it is not possible to read

 thanks a greeting!

here the file you want to charge my ecu when you modify it ..
 Thanks for everything guys ...