|
Title: Me7.5 reading and writing Post by: RSC on January 13, 2019, 10:03:41 AM Hi ,i have a kess v2 masterversion 5.0 and i started to write and read it in boot mod but I want to read and write from obd but i dont succes, ecu have immo on and i tried it normally and without the dash fuses and dont succed ! Can someone help me eoth that shit ? Thank you
Title: Re: Me7.5 reading and writing Post by: nyet on January 13, 2019, 10:19:53 PM Definitely don't bother posting any useful information, like ecu number, error messages, what you are doing to get into boot mode, why you didn't bother trying the nefmoto tools, etc.
Title: Re: Me7.5 reading and writing Post by: RSC on January 14, 2019, 01:48:13 AM Definitely don't bother posting any useful information, like ecu number, error messages, what you are doing to get into boot mode, why you didn't bother trying the nefmoto tools, etc. yes ,you’re right , rcu number is 06a906032de me7.5 kess sow ecu id and sw ,but when i push ok to proceed read ,i have error “ecu cannot be read “ and without the dash fuse ,i have “wake up error “ and in boot mode i can read and write it ok |