|
Title: Idle problem Post by: RSC on January 13, 2019, 01:09:46 PM Hi ,today i started to work with my idle rpm , i changed the NLLM maps (4 maps) with 1500,0 rpm every case! All good until car started to make over 60degrees wather ! Rpm goes down to 800 ! I dont understand why becouse i writed all the values to 1500 ,but last row for degrees is 64, i need to write this row until 90-100 degrees or is another map that i didnt modify
Title: Re: Idle problem Post by: nyet on January 13, 2019, 10:12:24 PM 1500 is ridiculously high.
Nothing will likely work properly. You can start with the torque reserve maps, but I doubt you'll get a stable 1500 rpm idle. Title: Re: Idle problem Post by: RSC on January 14, 2019, 02:34:11 AM 1500 is ridiculously high. car stay at 1500 until 60 degrees wather temperature is touched Nothing will likely work properly. You can start with the torque reserve maps, but I doubt you'll get a stable 1500 rpm idle. Title: Re: Idle problem Post by: Blazius on January 15, 2019, 03:25:08 PM I dont undestand.
You upped low temperatue temporary idle for heating until 60 C, it is normal it drops back to normal idle after that ... what are you trying to do. Title: Re: Idle problem Post by: RSC on January 17, 2019, 02:50:07 AM I dont undestand. i want to make car to run everytime 1500 at idle ,no metter the temperatures i need to modifiy the axis temperature ?You upped low temperatue temporary idle for heating until 60 C, it is normal it drops back to normal idle after that ... what are you trying to do. Title: Re: Idle problem Post by: Blazius on January 17, 2019, 06:53:31 AM i want to make car to run everytime 1500 at idle ,no metter the temperatures i need to modifiy the axis temperature ? Any why would you do that ? It is very high.. there is literally 0 reason to do , increased emmision, fuel usage etc. lol Title: Re: Idle problem Post by: nyet on January 17, 2019, 09:52:34 AM I dont undestand. You upped low temperatue temporary idle for heating until 60 C, it is normal it drops back to normal idle after that ... what are you trying to do. He said he modified NLLM not KFNLLKHM though.. |