|
Title: Immo2 to immo3 for mk4 Post by: ironhk on January 13, 2019, 10:49:11 PM I hv changed my cluster from immo2 to immo3 model
OLD (https://uploads.tapatalk-cdn.com/20190114/05c0317cd5a41db413d1e8e9c100a721.jpg) NEW (https://uploads.tapatalk-cdn.com/20190114/e0fe9814f78c4701a072bffa42535de8.jpg) After the replacement, no fuel consumption data can be shown on the cluster(hv data on old cluster) How can in solve it? Thank you 從我的iPhone使用Tapatalk 發送 Title: Re: Immo2 to immo3 for mk4 Post by: eliotroyano on January 14, 2019, 10:30:55 AM First you can not simply change both clusters with an ECU immo'ed OFF, you will need to match it. do you have the code of the old and new clusters? also the code of the ECU will be useful too? did you test speedometer in car moving? Basically all IMMO 3 cluster uses W/K-lines + CAN communication. I am not sure if your old IMMO 2 cluster and M38x ECU has CAN buses to share car speed and compute fuel consumption.
I have changed mine too but my ECU is an M383 CAN capable that uses an old IMMO3 old cluster too, then swap and match was not too complicated. Title: Re: Immo2 to immo3 for mk4 Post by: ironhk on January 15, 2019, 08:03:43 AM First you can not simply change both clusters with an ECU immo'ed OFF, you will need to match it. do you have the code of the old and new clusters? also the code of the ECU will be useful too? did you test speedometer in car moving? Basically all IMMO 3 cluster uses W/K-lines + CAN communication. I am not sure if your old IMMO 2 cluster and M38x ECU has CAN buses to share car speed and compute fuel consumption. I hv both skc on both clustersI have changed mine too but my ECU is an M383 CAN capable that uses an old IMMO3 old cluster too, then swap and match was not too complicated. But i do not need to match the old skc to the new one. The new can use, the speed, rpm temperature are well, only the data(fuel consumption) can not show. Mine car is m3.8.3 too 從我的iPhone使用Tapatalk 發送 Title: Re: Immo2 to immo3 for mk4 Post by: macxxx on January 15, 2019, 02:36:17 PM Propably the cluster waits for a consumtion signal over canbus - the old cluster recieved it by wire ( pin 32 of green plug ) so propably your ecu doest support it over can
Title: Re: Immo2 to immo3 for mk4 Post by: ironhk on January 15, 2019, 04:44:49 PM Propably the cluster waits for a consumtion signal over canbus - the old cluster recieved it by wire ( pin 32 of green plug ) so propably your ecu doest support it over can It is not related to the multi function stick right?從我的iPhone使用Tapatalk 發送 Title: Re: Immo2 to immo3 for mk4 Post by: eliotroyano on January 15, 2019, 07:11:34 PM The 061906018R is a CAN capable ECU.
Title: Re: Immo2 to immo3 for mk4 Post by: ironhk on January 15, 2019, 08:01:28 PM The 061906018R is a CAN capable ECU. Sorry wt do u mean?從我的iPhone使用Tapatalk 發送 Title: Re: Immo2 to immo3 for mk4 Post by: eliotroyano on January 17, 2019, 05:26:59 AM Sorry wt do u mean? 從我的iPhone使用Tapatalk 發送 The 06A906018R ECU has an CAN Bus inside. (http://i64.tinypic.com/2whfbde.jpg) Title: Re: Immo2 to immo3 for mk4 Post by: ironhk on January 17, 2019, 04:50:25 PM The 06A906018R ECU has an CAN Bus inside. Yeah i am using 018R and i hv sent u private msg and ask for help(http://i64.tinypic.com/2whfbde.jpg) Many thanks 從我的iPhone使用Tapatalk 發送 |