|
Title: EEPROM ST95080- ME7.7.0 - MCC SMART 451 - 62kW - 1.0T Engine - Need Help? Post by: MAN100 on January 15, 2019, 05:12:39 PM Hello everybody,
I read a lot here at the forum and get a lot of information regarding cloning and reading out of my ECU. Thank you all for sharing such great information and helping me to understand the whole thing much better. Unfortunately I can not find any information for my ECU from my car: VEHICLE: SMART ForTwo 451 YEAR: 2011 ENGINE: 1.0 Turbo POWER: 62kW ECU: ME 7.7.0 MICROCHIP: ST10F275 EEPROM: ST95080 I get both Data from a bought used ECU (MICROCHIP & EEPROM) with K-TEG Master and ECU in Bootmode. My Problem is I want to make the ECU virgin again to use it for my car. My original ECU is bricked and I tried to read out the data to make an new ECU/clone of my original ECU but my original ECU won't boot up anymore (water damage). So I need to make a virgin EEPROM File to flash back to the spare ECU to use this spare ECU in my car. I tried to figure it out by my own to make it virgin/IMMO off again but all I found on the net was only for ME7.1, ME7.5 and so on and it did not helped me to make my EEPROM Immo OFF :-( Maybe some experienced members can help me to make my EEPROM-File IMMO Off/Virgin again ? Or can share some information with me which bytes I need to change to get it work ? Thank you very much in advance. Best regards, MAN100 |