|
Title: MED9.1 request confirmation for krkate address Post by: alex-84 on January 20, 2019, 02:31:23 AM hello,
sorry for my bad english i try to do what i can... I'm looking for KRKATE on my audi S3 TFSI, I just found MK5 golf damos, I have a zone that fits perfectly between my file and KRKATE in the golf file, but it seems strange to me because on the MK5 GTI, except ED30, the injectors are not the same it seems to me ... and I'm not 100% sure that the damos of golf is correct my file is HW: 0261S02721 SW: 1037501227 8P0907115AP 0010 the krkate address I found is 1D5022, 16 bit HiLo, factor 0.000010 Which give 0,327680 original S3 file attached thanks a lot Title: Re: MED9.1 request confirmation for krkate address Post by: teobolo on January 20, 2019, 06:56:56 AM hi i have not look your file to tell you exact adress but krkte value in all audi s3 2000cc tfsi had value 2880 (16bit) without offset so search for that value.It is located after the injection angle maps .
Title: Re: MED9.1 request confirmation for krkate address Post by: alex-84 on January 20, 2019, 10:28:22 AM thanks,
the value I found is 0080 (or 8000 HiLo) in 16 bit without offset... I have a single value 2880 in my BIN, it is at the beginning of the file in an area that WINOLS displays in dark :-\ Title: Re: MED9.1 request confirmation for krkate address Post by: alex-84 on January 20, 2019, 12:00:30 PM comparing to another damos (audi a4 tfsi) I found another address that could match
1D8D1E, value 0B40, 16 bit HiLo, factor 0.000010, which give 0.028800 this value is lower on my s3 compared to the a4 tfsi damos but the values that follow are the same on several lines Title: Re: MED9.1 request confirmation for krkate address Post by: sonique on January 20, 2019, 05:13:02 PM correct address 1D8D1E
Title: Re: MED9.1 request confirmation for krkate address Post by: alex-84 on January 21, 2019, 01:23:31 PM thanks ;)
|