|
Title: 06A906032HJ 0002 small mod check SAI/DIAG Post by: krawciox on February 03, 2019, 11:23:42 AM I wanted to remove SAI from my 2003's A3 8L 1.8T AUM
Can anyone tell me If I done it right or wrong? - Zeroed MSLUB, MSLBAS - disabled circuit diagnosis in ESKONF by set SLV (N112) and SLP (J299) to 11. - in CWKONABG changed 05 to 01 (not to 00 as mentioned on s4wiki - why? see below) In BOSCH documentation (for Audi R4-5V 132kW found on forum) found that (https://i.imgur.com/HIJ7KzS.png) As I could see in this pic bit 2 is B_slsfz After that found this: (https://i.imgur.com/sREwHbW.png) 1 means SLS(Secondary Air Control) installed So I decided to put 0 on bit 2 CWKONABG 05(hex) = 101(bin) so 001(bin) = 01(hex) Please let me know, if i done it right. (Right addresses) Also Please check my cheksums which I corrected by me7sum. Including 3 files Stock Atfer mods After mods with corrected checksums. - Can I flash this? Title: Re: 06A906032HJ 0002 small mod check SAI/DIAG Post by: TurboMMJ on October 13, 2020, 12:18:25 PM I am on the same boat , following
|