|
Title: Disable Immo on ME7? Post by: Michel94 on February 21, 2012, 10:18:10 AM Hi, i search how i can disable Immo on ME7 to replace ecu or start without key ? thanks
Title: Re: Disable Immo on ME7.1? Post by: littco on February 21, 2012, 10:47:04 AM If its the same as me7.5 then download EEPROM. Change bits 12 and 22 from 1 to 2 then recalc checksum and you're done.
Title: Re: Disable Immo on ME7.1? Post by: Michel94 on February 21, 2012, 11:10:54 AM ok, but how i can download eprom 24C02? i require to unsolder it? i can't read it via odb? thanks
Title: Re: Disable Immo on ME7.1? Post by: littco on February 25, 2012, 09:26:15 AM http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=
This is what you need Title: Re: Disable Immo on ME7.1? Post by: julex on February 26, 2012, 11:58:41 AM ok, but how i can download eprom 24C02? i require to unsolder it? i can't read it via odb? thanks even if the software posted above doesn't work, hold on desoldering. Just get a proper clip on adapter and you can read the chip off without desoldering. Title: Re: Disable Immo on ME7.1? Post by: Michel94 on February 26, 2012, 12:22:50 PM ok i will try this.
Title: Re: Disable Immo on ME7? Post by: kaross on July 28, 2012, 02:26:12 AM I also want to immo of on ME7.1
0261206015 4.2V8 engine from Audi S8. on PCB there is no 24c02. Could it be 95040? Is immo off can be done like mention above. Title: Re: Disable Immo on ME7? Post by: kaross on July 28, 2012, 02:30:54 AM by the way 24c02 has 256byte space, but 95040 has 256byte.
Title: Re: Disable Immo on ME7? Post by: kaross on July 28, 2012, 03:52:17 AM 95040 has 512byte space. my mistake.
Title: Re: Disable Immo on ME7.1? Post by: Vdub-dub on August 06, 2012, 07:57:45 AM even if the software posted above doesn't work, hold on desoldering. Just get a proper clip on adapter and you can read the chip off without desoldering. This is what I used test clip and cable about 10quid and willem programmer no desoldering no problems |