NefMoto

I have changed this file in TunerPro (with plugin installed), when I save TunerPro say checksums successfully calculated, but when I try to check with ME7Check it say Found 1 errors. It safe to load in ECU?

Winols reveals 4 chks errors.
After checksumed it via winols, me7check reveals 1 error again.

C:\>me7check 1ok.bin
======================================================
me7check v1.11 (c) mki, 06/2004-07/2011
Checking file 1ok.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4013.00//24b/Dst02o/210201//
-> Contents of ECUID data table:
   - '0261207436'         (SSECUHN)
   - '1037362287'         (SSECUSN)
   - '06A906032HJ '       (VAG part number)
   - '0002'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'


Data area checksum failure(s) found
-> Found 1 error!!!   *******************************



Dont used it its my opinion.

then why tunerpro calculate wrong checksums? i have bought licence
and problem is not only with this file.

finally i have uploaded to my ECU, car start and work well without faults. Can be that sums are calculated correct but ME7Check show errors?

If work then ok.
Dont know
Someone else please confirm it.

Please report any problems with the plugin by email, I do not have the time to follow the forum regularly and might not see you plea for help. I can not solve problems that I am not aware off :)

Make sure you send me:

- OS Version & if 32bit or 64bit
- Tunerpro version
- Plugin version
- Stock bin file
- Modified bin file

Common problems:
- Don't forget the stock file used on ME7-2002 must be really stock.
- The plugin will not work on files that have been compressed or encrypted.

Checksum check ain't complaining :