|
Title: immo and communication, cluster change mk1 tt Post by: dclifford40 on March 16, 2019, 01:43:50 PM I can rebuild a 5v head no problem, but I suck at finding info on forums..
Basic info, mk1 TT 225 6spd (01) Kid I bought it from tried to fix the pixel problem himself and fried the board in the cluster. I got a used cluster I cant get the data out of the original cluster, so no pin. So Im trying to get into the ECM; 8n0 906 018K On my bench rig I still get immo blocking access, I guess I need to open the thing in boot mode,,but I cant find that information...there is a pin to ground,,and I cant find that on the forum..possibly pin 24,,but I really dont want to brick this thing.. Just trying to get this car running,, Thanks for all your help Title: Re: immo and communication, cluster change mk1 tt Post by: bororobbo on March 16, 2019, 02:02:36 PM Yes ground pin 24 with a resistor for 10 seconds, works everytime for me without fail, galletto even tells you.
You should find loads of information on goggle and on here to suite your needs on this topic. Sent from my SM-G955F using Tapatalk |