Title: egt senser map out 1.8t Post by: dj81 on March 19, 2019, 09:12:37 AM hi guy's
here is my map i am trying to map out the egt sensor as it is the last fault stored on my ecu would appreciate any help for mapping it out i have tried a few different ways but every time i think i sort it the car runs like a bag of s%&t Title: Re: egt senser map out 1.8t Post by: aef on March 20, 2019, 03:24:14 AM You should write more than this and describe what you did because its DIY here.
"help for mapping it out" will be helping you to map it out, not a ready file for you to just download. Title: Re: egt senser map out 1.8t Post by: dj81 on March 20, 2019, 01:14:42 PM Well i never asked any one to tune my file all i ask is for someone to point me in the right direction does anyone no the hex address for mapping out the egt sensor i have followed the wiki on egt and the car does not seem to like it. My car is a mk4 golf 1.8t aum with ko4 023 and 380cc injectors, decat, fmi and all the other usual stuff
I have been running the map for almost 2 years and it has been running well as it was originally a audi tt map bam and i flashed to my aum i think this is the file that does not seem to run well Title: Re: egt senser map out 1.8t Post by: adam- on March 20, 2019, 01:21:40 PM That file is garbage. KRKTE is wrong and you haven't followed the wiki at all. Cat isn't coded out either.
Title: Re: egt senser map out 1.8t Post by: prj on March 20, 2019, 01:36:35 PM Not to mention the EGT is used for closed loop EGT control.
Just deleting it without modifying BTS to compensate is the best path to melt the engine. The map posted is most likely not done by OP either. |