|
Title: Copying a map Post by: carsey on February 26, 2012, 11:52:26 AM Hi
I have a mate with a PD 115 remapped (AJM engine code) and hes asked me to copy his remapped file from his ECU and flash it onto another one from a AJM engine. Is there any sort of difficulties in copying a remapped file from one ECU and flashing it onto another? Ill be using a MPPS clone with V3 of the software. I take it both ECUs will ahve the same software numbers. Any issue with immobilisers etc? Chris Title: Re: Copying a map Post by: littco on February 27, 2012, 03:23:39 AM No issues with Immobs. just copy the map and flash onto the other ECU
I would personally do it on a bench harness though as if you brick the ecu there is little way to recover the ecu unless you desolder the chip. On the bench you have a more controlled enviroment to flash the ecu. Could you also post the file once you've done it please. I have an AJM which I mapped but would love to see a pro tuned version of the map. I am pretty sure mine is in the tuned section but if not I can post anyway. Even if the ECU numbers aren't exactly the same as long as the part number of the ECU is the same you'll be fine. Title: Re: Copying a map Post by: carsey on February 27, 2012, 12:40:55 PM Will see what I can do
Mate has a mapped golf, but it doesnt feel as quick as his mates mapped bora. |