|
Title: How to disable oil level sensor on 1.8t ANB Post by: Freddwood on March 27, 2019, 07:55:31 AM I recently swapped my 1.8T AJL harness with an ANB Harnessd and ecu to be able to flash in the car.
AJL engine had no oil level sensor so theres no place for then anb sensor. Until I change the oil pan I want to get rid of the error in my fis display, because it blocks everything else while driving. Can anyone hint me to what I have to disable? Title: Re: How to disable oil level sensor on 1.8t ANB Post by: BlackT on March 27, 2019, 09:30:41 AM You must disable it in cluster
Title: Re: How to disable oil level sensor on 1.8t ANB Post by: SQT on March 28, 2019, 03:28:03 AM I recently swapped my 1.8T AJL harness with an ANB Harnessd and ecu to be able to flash in the car. What is your dashboard?AJL engine had no oil level sensor so theres no place for then anb sensor. Until I change the oil pan I want to get rid of the error in my fis display, because it blocks everything else while driving. Can anyone hint me to what I have to disable? You must disable it in cluster I would also like to know how to do this, for general self-development.Title: Re: How to disable oil level sensor on 1.8t ANB Post by: BlackT on March 28, 2019, 04:18:05 AM I don't know yet, didn't try. But I wil go simple, put ressistors on dashboard pin, where cluster gets signal from oil sensor
Title: Re: How to disable oil level sensor on 1.8t ANB Post by: Freddwood on March 28, 2019, 06:14:57 AM Looked some more into it and decided it probably is faster to actually change to the proper oil pan with sensor cut out instead of messing around with the electric side of things ;D
Title: Re: How to disable oil level sensor on 1.8t ANB Post by: fknbrkn on March 28, 2019, 10:31:57 AM iirc its in cluster coding - oil service intervals
Title: Re: How to disable oil level sensor on 1.8t ANB Post by: BlackT on March 28, 2019, 11:06:10 AM iirc its in cluster coding - oil service intervals Can you explain little more precise? I was searching on net but didn't find anything usefulTitle: Re: How to disable oil level sensor on 1.8t ANB Post by: fknbrkn on March 28, 2019, 11:46:13 AM p/n: 8E0-920-9??-??
adaptations in this case A038,0,Oil Minimum Detection A038,5,Oil Minimum Detection A038,6,With this function the oil-minimum-warning at A038,7,low oil level can be deactivated or activated. A038,8,0 - Oil Minimum Detection not activated A038,9,1 - Oil Minimum Detection activated A038,10, A038,11,NOTE: Perform Security Access with "13861" first. ; A039,0,Oil Level Sensor Adaptation A039,5,Oil Level Sensor Adaptation A039,6,Determines if the TOG Sensor is installed or not. A039,7,0 - TOG Evaluation from the Instrument Cluster not activated A039,8,1 - TOG Evaluation from the Instrument Cluster activated A039,9, A039,10,NOTE: Perform Security Access with "13861" first. Title: Re: How to disable oil level sensor on 1.8t ANB Post by: BlackT on March 28, 2019, 01:24:40 PM p/n: 8E0-920-9??-?? Something doesn't workadaptations in this case A038,0,Oil Minimum Detection A038,5,Oil Minimum Detection A038,6,With this function the oil-minimum-warning at A038,7,low oil level can be deactivated or activated. A038,8,0 - Oil Minimum Detection not activated A038,9,1 - Oil Minimum Detection activated A038,10, A038,11,NOTE: Perform Security Access with "13861" first. ; A039,0,Oil Level Sensor Adaptation A039,5,Oil Level Sensor Adaptation A039,6,Determines if the TOG Sensor is installed or not. A039,7,0 - TOG Evaluation from the Instrument Cluster not activated A039,8,1 - TOG Evaluation from the Instrument Cluster activated A039,9, A039,10,NOTE: Perform Security Access with "13861" first. https://youtu.be/VRK4L9P1CgY Title: Re: How to disable oil level sensor on 1.8t ANB Post by: fknbrkn on March 28, 2019, 02:34:08 PM Maybe its because of different vehicle? ::)
Check coding yay Title: Re: How to disable oil level sensor on 1.8t ANB Post by: SQT on March 28, 2019, 10:34:49 PM p/n: 8E0-920-9??-?? fukenbroken the Allroad dashboard and 8e use frequency modulation, because it will still show an error. Or I'm wrong? today I will try on allroadadaptations in this case A038,0,Oil Minimum Detection A038,5,Oil Minimum Detection A038,6,With this function the oil-minimum-warning at A038,7,low oil level can be deactivated or activated. A038,8,0 - Oil Minimum Detection not activated A038,9,1 - Oil Minimum Detection activated A038,10, A038,11,NOTE: Perform Security Access with "13861" first. ; A039,0,Oil Level Sensor Adaptation A039,5,Oil Level Sensor Adaptation A039,6,Determines if the TOG Sensor is installed or not. A039,7,0 - TOG Evaluation from the Instrument Cluster not activated A039,8,1 - TOG Evaluation from the Instrument Cluster activated A039,9, A039,10,NOTE: Perform Security Access with "13861" first. Title: Re: How to disable oil level sensor on 1.8t ANB Post by: SQT on March 28, 2019, 10:39:40 PM Looked some more into it and decided it probably is faster to actually change to the proper oil pan with sensor cut out instead of messing around with the electric side of things ;D but it will be too easy, not interesting)))Title: Re: How to disable oil level sensor on 1.8t ANB Post by: BlackT on March 28, 2019, 11:49:21 PM Maybe its because of different vehicle? ::) is it possible to disable it on this MM TT cluster?Check coding yay Title: Re: How to disable oil level sensor on 1.8t ANB Post by: Freddwood on April 21, 2019, 04:46:21 AM I tried disabling it via adaption in vcds but there isn´t even a line which says oil level sensor.
Title: Re: How to disable oil level sensor on 1.8t ANB Post by: macxxx on April 21, 2019, 07:05:50 AM Is it a vdo or mm jeager? I can disable it in vdo
|