NefMoto

Technical => Flashing and Chipping => Topic started by: ZakDodge on March 29, 2019, 09:01:07 PM



Title: Cross flash 018 H file on 018 K ecu
Post by: ZakDodge on March 29, 2019, 09:01:07 PM
I’m going to try and cross flash this file. I’m not sure if it’s been done before yet or not but I have a TT 225 to play with so I figured I’d give it a shot since it’s not my daily driver or anything.


Sent from my iPhone using Tapatalk


Title: Re: Cross flash 018 H file on 018 K ecu
Post by: birchbark506 on March 30, 2019, 04:39:07 AM
what ecu is it? i tried 7115H on ecu that was 7115B and after corss flashing my ltft was very high, then when trying to go back to stock file 7115B from 7115H i would then get a EPC light and no throttle over 3000 RPM this was on MED 9.1 stick to stock file and mod that and reflash instead of crossing. only way to correct is to do full bdm or i had to use odis to restore ecu


Title: Re: Cross flash 018 H file on 018 K ecu
Post by: sonique on March 30, 2019, 01:41:25 PM
no
018k 512k
018h 1024k