|
Title: ME7.3H4 conversion turbo Post by: david97130 on March 30, 2019, 10:43:53 AM Salut je suis à la recherche d'information pour la conversion de mon ME7.3H4 punto 95 hp en 1.4 16s turbo. La voiture roule bien avec 0.3 bar, mais je ne peut pas rajouter plus de pression turbo, car la voiture ce met en rupture d’essence. je souhait faire la linéarisation du capteur MAP et supprimer la sonde lambda après catalyseur.
en pièces joint il y a le fichier stock et le fichier Map Pack Title: Re: ME7.3H4 conversion turbo Post by: Blazius on March 30, 2019, 12:51:15 PM English please.
Title: Re: ME7.3H4 conversion turbo Post by: david97130 on March 30, 2019, 03:23:35 PM Hi I am looking for information for the conversion of my ME7.3H4 punto 95 hp in 1.4 16s.
Swap in 1.4 16s turbo. The car runs well with 0.3 bar, but I can not add more turbo pressure, because the car puts it out of gas. I want to linearize the MAP sensor and remove the lambda probe after catalyst. in pieces attached there is the stock file and the Map Pack file. I created the map pack, belong to an ME7.3.1 file with its Damos. I modify the maps DSSOFS and DSSGRAD with the values 541.17 and 16.47. Value compatible with my new Map sensor. The car starts up, but stalls once the limiter has stopped. Title: Re: ME7.3H4 conversion turbo Post by: david97130 on April 03, 2019, 05:49:33 AM Il n'y a personne pour une aide ??
Title: Re: ME7.3H4 conversion turbo Post by: GPrace on March 26, 2024, 07:31:37 AM Hi,
Then did you succeed in the undertaking? I will start working on it shortly. Thank you |