|
Title: Help w/ Audi S6 C5 manual 559e file ? Post by: Rollerton on April 12, 2019, 12:40:35 PM Hey gang. Go easy on me, I'm not typically a numbskull and could use a review of this file. I was given this file a few years ago but the benevolent Daz (R.I.P) and have used it successfully once or twice. But the last couple times I have tried to use it, it writes fine, no errors, nothing strange at all.
Write flash, toggle ignition start car and it's GREAT. ---> However, the next time I cycle the key I lose ECU comms all together. Check engine light goes missing. No talking to ECU via OBD. I am able to backtrack and by removing the ECU and disconnecting it for a few seconds and reconnecting-- if I quickly connect to the ECU RIGHT WHEN I turn the key on it will connect and I can write a different file. Car will also start that one time, then cycle ignition again and no comms. I used the slick little binary checker tool stickied here and it says it found 4 errors! Does anyone have a minute to glance of this and see if the problem is obvious? Mucho Gracias my friends, ... cheers Robert Title: Re: Help w/ Audi S6 C5 manual 559e file ? Post by: Rollerton on April 14, 2019, 09:40:11 AM Nobody? Bueller..?
No love? I’ve tried the ME7sum tool but I can’t get it to output any corrected .bin. I probably don’t understand how it works. Title: Re: Help w/ Audi S6 C5 manual 559e file ? Post by: mdz on April 14, 2019, 11:47:22 AM Me7sum is command line tool, there's no graphical interface. You must run it in command prompt "me7sum name of the file.bin name of fixed file.bin"
Try this, should be ok. C:\Users\ 8) \Desktop>me7check 559ecorr.bin ============================================================================== me7check v1.08 (c) mki, 06/2004-04/2011 Checking file 559ecorr.bin (size=1048576) Reading Version Strings... -> Bootrom Version = 06.02 -> EPK = 42/1/ME7.1.1/5/8001.07//23h/Dst03o/040800// -> Contents of ECUID data table: - '0261206846' (SSECUHN) - '1037360170' (SSECUSN) - '4D0907559E ' (VAG part number) - '0002' (VAG sw number) - '4.2L V8/5V ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' -> No errors found. File is OK. ********************* Title: Re: Help w/ Audi S6 C5 manual 559e file ? Post by: Rollerton on April 14, 2019, 11:53:15 AM I’ll try it thanks!
I did get the output to sort of work elevated to admin; but the file kept coming up empty/ 2kb size. Obviously I was doing something wrong... |