NefMoto

Hello,

Anybody got a xdf (TunerPro definition) for the below?

Thanks

AUDI TT 1.8T 240HP 0261208086 375111.bin (size=1048576)

-> Bootrom Version = 05.12
-> EPK = 39/1/ME7.5/5/X505I//24B/P24BL01/270105/
-> Contents of ECUID data table:
   - '0261208086'         (SSECUHN)
   - '1037375111'         (SSECUSN)
   - '8N0906018CA '       (VAG part number)
   - '0010'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)

Or the .KP for WinOls.

Thanks

Post you bin

BIN attached

Do you have the A2L?

It can be imported into WinOLS.

I have it but I believe that it's corrupt.

Witch way to you check it ?
If you share, I can dobble-check, if A2L is realy corrupt or maybe just not fit to 240HP-file

The formatting of the A2L is bad, and to fix it would be a lot of work. How should I up load the file?

 

PS I just imported into Winols, and the maps look fine! I zipped up with: The A2L, Hex, SGM, BIN, and OLS (all versions). Let me know PM ME or Let me know how to post it.

Upload the file on a file hosting website and post the link or when you reply click additional options and you can upload files there but the size is quite limited.

MDC sent this zip to me to post because he could not.

https://mega.nz/file/EN81TKyT#70hOFOoBQHT-Jt_nHbCbS7RwaGuwnepWczmq9fyJyEs

Thanks for sharing,

I took a look in the A2L.
This file is not "normal" A2L standart and got a different syntax, so e.g. Vector A2L-editor or CMD-Studio will not open it.
The addresses in A2L seemt to be correct. It can be imported to WinOLS and the maps are correct (only LDRXN and LDRXNZK have wrong start addresses).

If you import into WinOLS, there are no folders, witch are releated to FR.
So this A2L is not ETAS based, more a export of a "what ever" dump-editor..

At this end, you are able to work with A2L or WinOLS, but comparing based on map-name (like it is possible in e.g. CMD-studio) is not possible and you need to re-work differences between BFV and BAM software on your own

BR
Jochen

Thank you but again its not my file I just uploaded, also yes I havent verified it, but if adresses are good then all good, that said I might have a KP for 018ca, will check later.

Also last time i checked , there are only 2-3 maps difference between bfv and 225 hp file via hex compare, could be wrong tho I cant remember.

Thanks goes to MDC for sharing ;)

(and a little bit to you, for uploading :) )



Witch file do you choose for comparing. 8N0 906 018CB BAM is compleatly off, when you just do a hex compare :(

Welcome

hey you think you can send me the immo file from this ecu please!!!

I don't have the IMMO

dang ok thank you!!

Why you need it?   

from my searches ive found that some immo files dont work with some ecu files. So if i cross flash a bam file on a a4 ecu i may run into an error. I did how ever find a blank immo id file that may just do what i need it to.

What ECU you have?

4b0906018m 5.12 rom   4b0906018cl 5.12 rom 4b0906018da 6.02 rom i have 3 different ecus and im using 8n0906018cb file as i was able to find a pretty defined xdf for it.. My box to use just for testing will be the 4b0906018cl rom 5.12  ...

Really im not opposed to using a different file just need to find matching xdf and immo or something to get me started. 

Yust do full write flash on 4b0906018m

Ok sounds like a plan

Its alive ya it flashed over worked good thanks for the nudge bro!

Sorry to take this thread from death, anyone can share the eeprom content of the 8N0906018CA 0010 ECU?

Anyone???

Why you need it?

For an ECU backup.

http://nefariousmotorsports.com/forum/index.php?topic=16046.0   8n0906018ca -00010 file someone was kind enuff to share

.a2l and stock bin