|
Title: Injectors sizing Sagem s3000 Post by: jessica997 on April 28, 2019, 12:51:47 AM Hi. Can I find someone who can help with injectors sizing with Laguna Coupe 2,0t?
Title: Re: Injectors sizing Sagem s3000 Post by: aleks19411 on April 28, 2019, 08:41:48 AM write injector numbers..
Title: Re: Injectors sizing Sagem s3000 Post by: jessica997 on April 30, 2019, 12:16:05 AM Original injectors Bosch 0280158195. New injectors Bosch 0280158211. Fuel pressure 3,5bar
Title: Re: Injectors sizing Sagem s3000 Post by: aleks19411 on April 30, 2019, 12:30:34 AM EV14, 12 Ohm, 485cc, E 26°, Jetronic, O-O 34 mm, Long spray end, total 63 mm Bosch 0280158211
Maximum flow approx 485cc @ 3 bar Short type injector (O-ring distance is 34 mm), long spray tip Compatible with E85/RE85 and gasoline 14 mm O-rings, compatible with ethanol and gasoline Jetronic (EV1)-type connector High resistance 10 hole spray tip Split type spray Angle between connector and spray level 130 deg. Title: Re: Injectors sizing Sagem s3000 Post by: jessica997 on April 30, 2019, 03:18:43 AM Ok I know it :-) but i need help with modify file for New injectors :-)
Title: Re: Injectors sizing Sagem s3000 Post by: nyet on April 30, 2019, 01:51:09 PM What's the problem?
Title: Re: Injectors sizing Sagem s3000 Post by: aleks19411 on April 30, 2019, 02:05:24 PM join the question, what's the problem? constant?
Title: Re: Injectors sizing Sagem s3000 Post by: jessica997 on April 30, 2019, 04:37:18 PM I dont know how to do this. This is my problem. Maybe someone can Tell me how can i make this mod or do this for me. Not for free...
Title: Re: Injectors sizing Sagem s3000 Post by: Blazius on April 30, 2019, 04:53:15 PM The question is do what ???
Are you looking for suggestions , or configuring the ecu for the new injectors ? If it uses ME7 ( which is what this forum is about) then you need to change KRKTE, and TVUB at minimum. Title: Re: Injectors sizing Sagem s3000 Post by: nyet on April 30, 2019, 05:30:53 PM I dont know how to do this. This is my problem. Maybe someone can Tell me how can i make this mod or do this for me. Not for free... Have you read any of the fueling section of the s4 wiki? Done any injector research or study? Done anything at all to prep? Title: Re: Injectors sizing Sagem s3000 Post by: prj on May 03, 2019, 03:18:55 AM SAGEM3000 is nothing like a Bosch ECU... so most stuff on this forum will not be useful.
Title: Re: Injectors sizing Sagem s3000 Post by: Ludo80 on December 28, 2019, 05:49:34 AM Hi, injectors lag time is used simultaneously on two correction maps. See below this map in 8 bits took from 2.0T 170hp dump , factor is 8 with zero offset. PM me if needed.
(https://zupimages.net/viewer.php?id=19/52/af4g.png) Title: Re: Injectors sizing Sagem s3000 Post by: Ludo80 on December 28, 2019, 05:51:19 AM some difficulties to share a screenshot, sorry...
https://zupimages.net/viewer.php?id=19/52/af4g.png (https://zupimages.net/viewer.php?id=19/52/af4g.png) |