|
Title: Please Help Tune for Audi A4 B5 4B0906018CG Post by: Hennervw on April 29, 2019, 08:44:29 AM Hey
Title: Re: Please Help Tune for Audi A4 B5 4B0906018CG Post by: Hennervw on April 29, 2019, 08:48:26 AM Hey guys, I've built an Audi A4 B5 with the 1.8t AWT engine and would like to vote it now. Now I have seen that the ME7.5 is not as easy as I thought and hope now that I can help people here to create a reasonably reasonable setup. I have installed a 76mm exhaust system, 2mm compression reduction plate to get a compression of 8,5-8,9: 1. Then there is a 3 bar fuel pressure regulator, 630cc Simens Deka injectors and a GT3076 turbocharger.
The car should run at 1.5 bar holding pressure and a Lambda ratio of 0.85-0.90. Nachkat probe as well as EGR and secondary air pump should be programmed out. I am the people who can help me and not only chatter ever thankful for your participation. PS: I come from Germany for people who can come from here also write me in German to the grammatical mistakes of translators and long puzzles to spare. Yours sincerely Wink Title: Re: Please Help Tune for Audi A4 B5 4B0906018CG Post by: nyet on April 29, 2019, 06:51:02 PM have you read any the community file threads?
Title: Re: Please Help Tune for Audi A4 B5 4B0906018CG Post by: Hennervw on April 30, 2019, 03:39:00 AM I've searched all the chiptuning forums but no one posted anything matching so I'm looking for it here
Title: Re: Please Help Tune for Audi A4 B5 4B0906018CG Post by: nyet on April 30, 2019, 01:52:41 PM I've searched all the chiptuning forums but no one posted anything matching so I'm looking for it here That isn't what I asked Title: Re: Please Help Tune for Audi A4 B5 4B0906018CG Post by: macxxx on May 01, 2019, 01:17:36 AM it a DIY forum so no one will post a ready to go file and you won't find them here - start from stock file , read the topics etc.
|