|
Title: Is there a way to flash 5G0906259F Software onto 5G0906259E ECU Simos18.1? Post by: NBR on April 29, 2019, 11:36:25 PM Hi guys
Stupid Question, but I want to know if it's possible to flash SC800O3 sw version from a 5G0906259F ECU onto a 5G0906259E via bench flash? Or will the ECU need to be replaced (if there are no differences in the physical ECU). Title: Re: Is there a way to flash 5G0906259F Software onto 5G0906259E ECU Simos18.1? Post by: k0mpresd on April 30, 2019, 07:52:23 AM if they are the same HW number you can use frf to update to the desired software.
Title: Re: Is there a way to flash 5G0906259F Software onto 5G0906259E ECU Simos18.1? Post by: NBR on April 30, 2019, 09:32:35 AM The part number differs at the end "E" vs "F" . Frf update only lists software versions from the "E" ecu because that's what's on the car
Title: Re: Is there a way to flash 5G0906259F Software onto 5G0906259E ECU Simos18.1? Post by: k0mpresd on April 30, 2019, 12:25:04 PM The part number differs at the end "E" vs "F" . Frf update only lists software versions from the "E" ecu because that's what's on the car i will repeat again: if the HW (HARDWARE) numbers are the same, the ecu can be updated to the desired software via frf. |