|
Title: 1.8 T lambda after cat off Post by: tabulek on May 03, 2019, 03:11:37 PM Hi All
I need to turn off lambda sensor after the catalytic converter. Lambda is physically disconnected. HW: 0261206435 SW: 1037352757 I turned off in addresses: 018196 -> 0 018197 -> 0 0181A2 -> 0 but there is still an error 17526 - sensor heating, B1 S2 open circuit. What is the solution to not display the error? Title: Re: 1.8 T lambda after cat off Post by: nyet on May 03, 2019, 04:17:00 PM Did you bother reading this before posting
https://s4wiki.com/wiki/Tuning#Rear_O2_Sensors Title: Re: 1.8 T lambda after cat off Post by: tabulek on May 03, 2019, 04:44:02 PM Yes i read so. completely different addresses
Title: Re: 1.8 T lambda after cat off Post by: nyet on May 03, 2019, 06:16:00 PM Yes i read so. completely different addresses So you're missing a bunch of items from the list :) Title: Re: 1.8 T lambda after cat off Post by: dilly on May 03, 2019, 09:29:16 PM What is the solution to not display the error? research and find the addresses in your file for your ecu part number it is the basics Title: Re: 1.8 T lambda after cat off Post by: tabulek on May 04, 2019, 05:13:05 AM Thanks for the answer. I found a solution. This file is lambda off.
I turned off in addresses: CDHSH -> 018196 -> 0 CDHSHE -> 018197 -> 0 CDLSH -> 0181A2 -> 0 CWKONLS -> 0181B1 -> 1 CLAHSH -> 014D3A -> 0 CLAHSHE -> 014D3B -> 0 CLALSH -> 014D5E -> 0 FKHABMN -> 01908D -> 0 Title: Re: 1.8 T lambda after cat off Post by: nyet on May 04, 2019, 08:10:33 AM What are each of the addresses you listed?
Title: Re: 1.8 T lambda after cat off Post by: tabulek on May 04, 2019, 08:18:52 AM What are each of the addresses you listed? if you like, I can give it in German, because it's hard for me to translate Title: Re: 1.8 T lambda after cat off Post by: Blazius on May 04, 2019, 09:13:34 AM if you like, I can give it in German, because it's hard for me to translate just post the abbreviation from the FR Title: Re: 1.8 T lambda after cat off Post by: nyet on May 04, 2019, 01:38:39 PM if you like, I can give it in German, because it's hard for me to translate It was a rhetorical question. Do they match the map abbreviations listed in the s4wiki or not? Title: Re: 1.8 T lambda after cat off Post by: tabulek on May 05, 2019, 04:36:16 AM not all. but yes they helped me;)
edited and signed above Title: Re: 1.8 T lambda after cat off Post by: fknbrkn on May 05, 2019, 10:16:43 AM And lambda regulation is.. ?
Title: Re: 1.8 T lambda after cat off Post by: tabulek on May 05, 2019, 11:20:46 AM And lambda regulation is.. ? Lambda regulation is in before of the catalytic converter Title: Re: 1.8 T lambda after cat off Post by: adam- on May 06, 2019, 12:07:15 AM You missed ESKONF.
Title: Re: 1.8 T lambda after cat off Post by: tabulek on May 06, 2019, 02:03:34 AM You missed ESKONF. for me in the address from damos is FFTitle: Re: 1.8 T lambda after cat off Post by: tabulek on May 08, 2019, 12:34:31 AM finally, the lambda after cat. would not work and there was no error to turn off:
CDHSH -> 018196 -> 0 CDHSHE -> 018197 -> 0 CDLSH -> 0181A2 -> 0 CLAHSH -> 014D3A -> 0 CLAHSHE -> 014D3B -> 0 CLALSH -> 014D5E -> 0 Regards ;) Title: Re: 1.8 T lambda after cat off Post by: adam- on May 08, 2019, 02:01:57 AM And ESKONF.
Title: Re: 1.8 T lambda after cat off Post by: tabulek on May 08, 2019, 02:07:36 AM And ESKONF. I did not change eskonf in this ecu |