NefMoto

Noob Zone => Noob Questions => Topic started by: Polat1987. on May 05, 2019, 04:04:14 AM



Title: Stage 3 mk2 help me!!
Post by: Polat1987. on May 05, 2019, 04:04:14 AM
Hoi my name is polat from turkey.
My setup.
1.8 20vt aqx ( seat ibiza cupra )
K04 turbo
Forge blow of
Big tip
Bam intake manifold
Big front mount intercooler 
Pipercross open airfilter
Bosch 380cc injectors
6 bar extended feul pump
4 bar fuel regulator valve
High flow exhaust manifold
3 inch downpipe + exhaust ( no cat ) 
- g60 gearbox
- The calibration is now based on stage 1..original aqx. Cat - egr immo and al the other crap is already earsed from ecu.
If you want to help i send file.(https://uploads.tapatalk-cdn.com/20190505/5087e32619517b347e881200ba97477d.jpg)

Verstuurd vanaf mijn SM-G950F met Tapatalk



Title: Re: Stage 3 mk2 help me!!
Post by: _nameless on May 05, 2019, 05:39:36 AM
Hoi my name is polat from turkey.
My setup.
1.8 20vt aqx ( seat ibiza cupra )
K04 turbo
Forge blow of
Big tip
Bam intake manifold
Big front mount intercooler 
Pipercross open airfilter
Bosch 380cc injectors
6 bar extended feul pump
4 bar fuel regulator valve
High flow exhaust manifold
3 inch downpipe + exhaust ( no cat ) 
- g60 gearbox
- The calibration is now based on stage 1..original aqx. Cat - egr immo and al the other crap is already earsed from ecu.
If you want to help i send file.(https://uploads.tapatalk-cdn.com/20190505/5087e32619517b347e881200ba97477d.jpg)

Verstuurd vanaf mijn SM-G950F met Tapatalk





Lol


Title: Re: Stage 3 mk2 help me!!
Post by: Blazius on May 05, 2019, 05:44:14 AM
Uh, what ? You want someone to tune it for you ? Go to services.


Title: Re: Stage 3 mk2 help me!!
Post by: nyet on May 05, 2019, 12:20:43 PM
Why on earth did you post this in Documents?

Moved. Not a great start.


Title: Re: Stage 3 mk2 help me!!
Post by: Polat1987. on May 05, 2019, 12:22:01 PM
Just advice from a experienst tuner about how to do!!! Help me out or say nothing please this is a forum not snap chat

Verstuurd vanaf mijn SM-G950F met Tapatalk



Title: Re: Stage 3 mk2 help me!!
Post by: nyet on May 05, 2019, 12:26:56 PM
Help me out or say nothing please this is a forum not snap chat

Are you telling me what to do or not do?

How about YOU follow the rules here, as established by the forum.

Start with
1) posting to the correct subforum
2) reading all FAQs (and, in particular, the tuning wiki) before posting
3) posting logs when asking for tuning advice (see also following rules)


Title: Re: Stage 3 mk2 help me!!
Post by: adam- on May 06, 2019, 12:08:29 AM
That's not a BAM inlet.


Title: Re: Stage 3 mk2 help me!!
Post by: Carsinc on May 09, 2019, 09:10:36 PM
That's not a BAM inlet.

Dude I thought I was losing my mind...


Title: Re: Stage 3 mk2 help me!!
Post by: Kompiesto on May 09, 2019, 11:12:07 PM
1. BAM have on the right side throttle. Not APX engine?  ::)
2. Not use "help me !!!" and "!!!"
3. You need MAF from BAM and scale it
4. Scale injectors, not forget about FPR  ;)
5. Why You do immo off?  :o
6. EGR? Is a diesel engine?  :D
and a lot changes...
my advice... go to tuner... tuning modified car is not simple thing.