|
Title: VE table from ME7.3.1 to Link G4+ Post by: Mania4e11o on May 06, 2019, 10:23:19 AM Hi.
I have a Alfa Romeo 156 with an engine 3.0V6 from 166 Alfa. ECU on the 166 3.0V6 through ME3.1. But there is also a 3.2 engine that is controlled via ME7.3.1. We installed Link G4 + Extreme on our car. Question: Is it possible to somehow copy the VE table from ME7.3.1 or from ME3.1 to Link G4 +? I found the xdf file for 147GTA (3.2V6). Can you trust a KFMIOP card? This is KFMIOP (https://d.radikal.ru/d42/1905/b7/8d113521d426.jpg) This is VE table Link G4+ (https://a.radikal.ru/a36/1905/26/f4fc6b83af1c.jpg) I also have several base maps that relate to the characteristics of the engine. Are there similar in ME7.3.1? For example: Charge Temp Approximation Help from Link Charge Temperature refers to the temperature of the air entering the engines intake port. This value can be estimated from the Engine Coolant Temperature (ECT) and Intake Air Temperature (IAT) parameters at various load points. (https://a.radikal.ru/a23/1905/a1/140ddb970e31.jpg) Title: Re: VE table from ME7.3.1 to Link G4+ Post by: nyet on May 06, 2019, 10:26:34 AM KFMIOP is not VE lol
Title: Re: VE table from ME7.3.1 to Link G4+ Post by: Mania4e11o on May 06, 2019, 12:12:20 PM KFMIOP is not VE lol ;D Nevertheless, is there such a map in ME7.3.1, or is it necessary to recalculate having several maps? I understand the VE table is a moment curve that should be the basis for tuning. Can I somehow find or calculate the VE table in this ecu orig file? Title: Re: VE table from ME7.3.1 to Link G4+ Post by: prj on May 07, 2019, 02:21:52 AM No, you can't copy anything, you need to put the car on the dyno and tune it.
Go to the tuner who sold you the ECU and have them tune it, it seems like you have no idea what you are doing. |