|
Title: ESKONF R32 Golf MK5 Me7.1.1 Post by: mbkr89 on May 07, 2019, 09:52:07 PM Is the Eskonf on R32 Me 7 equal S4 Eskonf from Wki ?
I search bits for kill sae and sec lambda. Title: Re: ESKONF R32 Golf MK5 Me7.1.1 Post by: nyet on May 07, 2019, 10:20:49 PM Likely not.
Title: Re: ESKONF R32 Golf MK5 Me7.1.1 Post by: mbkr89 on May 07, 2019, 11:27:36 PM not god.
Someone have info about the bytes Title: Re: ESKONF R32 Golf MK5 Me7.1.1 Post by: marchewa on May 08, 2019, 03:26:40 PM I'm not sure if every r32 me7.1.1 have identical eskonf configuration but this is what I've found by flash'n'try method in 032CA ecu:
Byte 0: [evap] [] [] [] Byte 1: [] [] [] [] Byte 2: [] [] [] [] Byte 3: [] [] [] [sai] Byte 4: [] [sai] [] [] Byte 5: [rear 02] [] [] [] Byte 6: [] [] [rear O2] [] Byte 7: [] [] [] [] Byte 8: [] [] [] [] Byte 10: [] [] [] [] Byte 11: [] [] [] [] Byte 12: [] [] [] [exh. flap] Can't remember which exactly bit pair is responsible for N112 and which for J299- will check it tomorrow. EDIT: mistakes in bytes 2,3,4 corrected Title: Re: ESKONF R32 Golf MK5 Me7.1.1 Post by: mbkr89 on May 08, 2019, 11:42:10 PM Thank you
Title: Re: ESKONF R32 Golf MK5 Me7.1.1 Post by: marchewa on May 08, 2019, 11:46:23 PM Sorry, I made mistake in this table
Byte 3 (not 2) is J299 relay Byte 4 (not 3) is N112 solenoid This is proper table: Byte 0: [evap] [] [] [] Byte 1: [] [] [] [] Byte 2: [] [] [] [] Byte 3: [] [] [] [sai] Byte 4: [] [sai] [] [] Byte 5: [rear 02] [] [] [] Byte 6: [] [] [rear O2] [] Byte 7: [] [] [] [] Byte 8: [] [] [] [] Byte 10: [] [] [] [] Byte 11: [] [] [] [] Byte 12: [] [] [] [exh. flap] Title: Re: ESKONF R32 Golf MK5 Me7.1.1 Post by: mdccode5150 on October 11, 2020, 08:59:07 PM Here is some more ME7.1 and 7.1.1 VR8 W8 might be helpful
|