|
Title: Dsg DQ250 LC problems Post by: logic987 on May 08, 2019, 09:58:23 PM I have a Audi A3 3.2 DSG quattro (2004)
DSG is dq250 Hardware version c30 I paid a tune and wanted the LC raised to 4000-4500 for drag purpose and after 4 months my tuner is saying that it's not posible on my dsg If I press the accelerator until kick down the lc goes to 4000 but if i press the pedal to the end and the kick down switch get pressed the lc goes to 3000 And the second question What tool and software do I need to read the map out and to flash it back again? Thanks Poslano sa mog SNE-LX1 koristeći Tapatalk Title: Re: Dsg DQ250 LC problems Post by: gt-innovation on May 09, 2019, 01:47:59 AM Maybe your tuner forgot to tune the last value of the lc maps. If that is wrong it is easy to fix yourself.
There are several other lc limiters in a cxx gearbox as well. Not only the 2 mains ones. Title: Re: Dsg DQ250 LC problems Post by: logic987 on May 09, 2019, 02:20:07 AM Do you know what values i need to check?
Poslano sa mog SNE-LX1 koristeći Tapatalk Title: Re: Dsg DQ250 LC problems Post by: gt-innovation on May 09, 2019, 05:10:15 AM This is a diy forum so If you define your software version you can find them for sure yourself... most of them include the word launch in the description...
Use the search button and you will find a very big thread about dq250. |