|
Title: Help with tuning. Post by: redg2 on March 03, 2012, 07:45:04 PM Im trying to use NOTORIOUS VR'S tune on my a box ecu. I got tuner pro to read the diffrences but i dont know how to swap them over, where do i go from here? Also his tune doesnt have any maf changes, so can i swap over the right for the a box? Sorry newb here trying to learn but nothing really comes back up when i search.
Thanks Title: Re: Help with tuning. Post by: julex on March 03, 2012, 08:02:39 PM you can simply copy paste the data while having two tuner pros open at the same time. Or when doing a compare.
Title: Re: Help with tuning. Post by: redg2 on March 04, 2012, 05:08:16 PM thanks for the response, but when i try to open another tuner pro it says that tuner pro is already opened and will not allow me to open up another one...
Title: Re: Help with tuning. Post by: julex on March 04, 2012, 06:12:12 PM correct. but when in TunerPro and you choose "Tools", "Advanced", "New TunerPro instance", it let's you open as many as you desire :)
Title: Re: Help with tuning. Post by: phila_dot on March 04, 2012, 06:45:09 PM You cannot use the compare or difference tool in Tunerpro for these two files as they will not both line up to a single definition. Open the A box original with A box definition in one window and NVR's file in another with M box def. Copy MAF table values from MLHFM, KFKHFM, MLOFS from the A box to M box. Done. You will also have to do an engine recode and likely cluster recode.
Title: Re: Help with tuning. Post by: redg2 on March 05, 2012, 10:27:18 PM this is one thing i was also wobdering about when i look at tye file it shows the ecu as a bosch maf, not a hitachi. wouldnt that mean its already calibrated for a box?? gahhh so confused! thabks for the help guys
|