|
Title: me7_95040 command line issues Post by: 12cscott on June 05, 2019, 07:03:49 PM Hi I am new to this and have very little to none experience when it comes to command. i keep getting thisIn these posts I shall list everything I have learned so far from this Forum and other user's such as ddillenger Step 1 download ArgDub's software. there are a few versions: me7_95040 (page 1) me7_95040_v1.31 (page 1) ME7EEPROM (page 12) and can be found here http://nefariousmotorsports.com/forum/index.php?topic=1168.0title= (http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=) Step 2 buy a cable I am using a blue KKL cable. When you plug your cable in windows with find the drivers keep an eye on what COM port it installs under Step 3 bench set-up: You can make up a rig to work on the ECU out of the car you will need to do the following: (http://i743.photobucket.com/albums/xx75/onsperformance/Ecupinout1.jpg) (http://s743.photobucket.com/user/onsperformance/media/Ecupinout1.jpg.html) (http://i743.photobucket.com/albums/xx75/onsperformance/OBDportconnector.gif) (http://s743.photobucket.com/user/onsperformance/media/OBDportconnector.gif.html) (http://i743.photobucket.com/albums/xx75/onsperformance/WiringDiagram.gif) (http://s743.photobucket.com/user/onsperformance/media/WiringDiagram.gif.html) Or you can do it in the car over OBD you will be able to read the ECU but not write to it unless you open the ECU and ground pin 24 Step 4 you will need to put your ECU into bootmode: In order to enter bootmode you will have to ground out pin24 on the ECU using the following procedure, 1. ecu power off 2. ground pin 24 3. power on ecu. 4. wait 2-3 seconds. (some people say up to 10 seconds) 5. remove pin 24 ground 6. try to connect Step 5 opening Command click on your windows start menu and search cmd Click on command it will open and you should see something a long these lines C:\Users\your name> drag and drop the downloaded file of your choice (most people say v1.31 works best) and it should look like this C:\Usesrs\your name\Downloads\me7_95040.exe now hit enter and you should see this (http://i743.photobucket.com/albums/xx75/onsperformance/Screenshot2013-11-26211214.png) (http://s743.photobucket.com/user/onsperformance/media/Screenshot2013-11-26211214.png.html) You will see a list of commands in order to read your ecu you must remember what com port your cable installed to. C:\Usesrs\Steven\Downloads\me7_95040 --bootmode -r -p 3 95040.bin and to write C:\Usesrs\Steven\Downloads\me7_95040 --bootmode -w -p 3 95040.bin This is as far as I have got next to come will be how to turn the Immobiliser off and correct the check sum. I need to research that try it and then I will up date the thread. Also I hope to flash a new map onto my ECU and I will add that in the future as well The system cannot find the path specified. when i enter this C:\Users\Corey\Downloads\me7_95040 --bootmode -r -p 3 95040.bin what am i doing wrong Title: me7_95040 command line issues Post by: BlackT on June 05, 2019, 11:04:06 PM You me7_95040.exe must be in C:/users/yourname folder
The .bin file from ecu must be in that folder too Title: Re: me7_95040 command line issues Post by: nyet on June 06, 2019, 09:25:44 AM Please read all stickies in this forum, including this one
http://nefariousmotorsports.com/forum/index.php?topic=11034.0title= Title: Re: me7_95040 command line issues Post by: 12cscott on June 06, 2019, 05:30:17 PM You me7_95040.exe must be in C:/users/yourname folder how do i get the bin i am a complete noob i am sorryThe .bin file from ecu must be in that folder too Title: Re: me7_95040 command line issues Post by: Blazius on June 06, 2019, 05:32:08 PM how do i get the bin i am a complete noob i am sorry You read it like ECU bin, using a cable.(cluster bin) Title: Re: me7_95040 command line issues Post by: 12cscott on June 06, 2019, 06:15:50 PM OK that's what I thought so I could be the same issue I'm having with Trying to Flash read Was trying to put it in the boot mode because I've got it set up on a bench Because at the moment the wiring harnesses cut up to put in an mk1
Sent from my SM-G973U using Tapatalk Title: Re: me7_95040 command line issues Post by: nyet on June 06, 2019, 06:16:55 PM You me7_95040.exe must be in C:/users/yourname folder The .bin file from ecu must be in that folder too You mean for writing. Title: Re: me7_95040 command line issues Post by: BlackT on June 06, 2019, 11:26:40 PM You mean for writing. Yes you are right, I thought he wants to write.For OP, if you want to read, sometimes you can do it via OBD Title: Re: me7_95040 command line issues Post by: 12cscott on June 07, 2019, 03:07:32 AM I did try Via Obd and I trad flash reading and it gave me an error saying Up mobilizer not authenticated
Sent from my SM-G973U using Tapatalk Title: Re: Re: me7_95040 command line issues Post by: 12cscott on June 07, 2019, 03:19:27 AM I did try Via Obd and I trad flash reading and it gave me an error saying Up mobilizer not authenticated Immobilizer Sent from my SM-G973U using Tapatalk Sent from my SM-G973U using Tapatalk Title: Re: me7_95040 command line issues Post by: thefwrs on June 07, 2019, 08:32:02 AM You are not in boot mode.
Search youtube for a video "boot mode me7.5" or whatever you got if you haven't already. try it again. It can take a few tries, thats why some people solder that ground to a switch. You can also put the .bin's and argdub's tool program files on your desktop and drag and drop them into cmd window. It will automatically put its address location in cmd for you. Title: Re: me7_95040 command line issues Post by: 12cscott on June 08, 2019, 06:26:06 PM Ok I am 90% sure I have it in boot mode but still stuck at the system cannot find the path specified and it is kicking my but and hope I can figure it out so I can Defeat the immobilizer
Sent from my SM-G973U using Tapatalk Title: Re: me7_95040 command line issues Post by: 12cscott on June 08, 2019, 08:26:07 PM Could it be my Environmental variables or my cable or what should I look in to doing
Sent from my SM-G973U using Tapatalk Title: Re: me7_95040 command line issues Post by: nyet on June 08, 2019, 11:40:03 PM system cannot find the path specified Please reread the article re: cmd.exe. Your issues have literally nothing to do with the ECU, software, or cable, but rather your lack of understanding of how cmd.exe works. Title: Re: me7_95040 command line issues Post by: 12cscott on June 10, 2019, 05:27:14 AM Thank you Nyet I Finally figured it out now I have saved the 95040.bin to my file and opened it in the hex editor and want to turn the immo off and was wondering what values to change I have looked for a while but haven't found the answer to that question yet I am sure it is one here somewhere
Sent from my SM-G973U using Tapatalk Title: Re: me7_95040 command line issues Post by: 12cscott on June 14, 2019, 04:16:36 PM what dose it mean Searching Chip_Select pin ... FAIL. (error=0x01)
|