|
Title: b5 s4 failing flash Post by: dilly on June 25, 2019, 09:57:47 PM got an s4 6mt and i read the flash all fine and dandy but as soon as i want to flash it of course it doesnt work
any ideas? here is nefmoto's output log it always fails the data transfer exit after the first block nefmoto has worked flawlessly for me in the past. i am not sure if this ecu is too stubborn or what if i am missing something lmk so i can get it Code: Validated FTDI device is in dumb mode. Title: Re: b5 s4 failing flash Post by: prj on June 26, 2019, 12:44:47 AM Wrong chip in ECU or encryption board.
Title: Re: b5 s4 failing flash Post by: _nameless on June 26, 2019, 05:31:05 AM I got a hand full of these worthless things anyone want one or 50 lol
Title: Re: b5 s4 failing flash Post by: dilly on June 26, 2019, 10:24:39 AM so simple solution.. just buy a new h or m box?
Title: Re: b5 s4 failing flash Post by: Blazius on June 26, 2019, 11:10:01 AM The one that has more support available.
Title: Re: b5 s4 failing flash Post by: _nameless on June 26, 2019, 11:27:37 AM Any apb ecu will work fine
Title: Re: b5 s4 failing flash Post by: dilly on June 26, 2019, 01:02:30 PM The one that has more support available. whatever one i can find of those 2 boxes i will be getting i know they are hitachi and cross flashable with recode on cluster thanks for the help guys Title: Re: b5 s4 failing flash Post by: prj on June 27, 2019, 02:02:20 AM The one that has more support available. LOL what did I tell you about keeping it shut when you don't know WTF you are on about?All ME7.1 2.7TT 29F800BB are crossflashable. Can be any S4/RS4/A6 ECU apart from newer ME7.1.1 A6 versions. There are about 20 part numbers that will fit. Doesn't matter Bosch or Hitachi, you can cross flash them all the same. Title: Re: b5 s4 failing flash Post by: IamwhoIam on June 27, 2019, 02:41:10 AM What he said
Title: Re: b5 s4 failing flash Post by: Blazius on June 27, 2019, 11:42:43 AM LOL what did I tell you about keeping it shut when you don't know WTF you are on about? All ME7.1 2.7TT 29F800BB are crossflashable. Can be any S4/RS4/A6 ECU apart from newer ME7.1.1 A6 versions. There are about 20 part numbers that will fit. Doesn't matter Bosch or Hitachi, you can cross flash them all the same. The hell you are on about ? I said use a flash or anything that has the most support aka damos etc available. I dont care if its crossflashed, bought stock or whatever, I just said use the logical ecu/bin/flash whatever. jesus christ , if you have a wish to pick fights with members do it with somebody else please , What I said has little to do with what you said, or you need to severely rethink your attitude it seems. ffs Unbelievable for such a "respected" tuner on this forum. Lmao. Title: Re: b5 s4 failing flash Post by: dilly on June 27, 2019, 12:38:23 PM LOUD NOISES
guys relax this has all been helpful and reasonable info. Personally i did not know all the me7.1 2.7 ecu's can be crossflashed. i found a spare A box in my trunk that had a normal 800bb chip on the board and i flashed a m box file and recoded cluster to iirc 1027 and now i have a tach and no powertrain errors. no need to try and rip each other a new one bois thank you all for the support. i will most likely be needing more as i will make a new topic about deleting a pcode unless i find one already posted btw here is what the inside of my h box looked like i assume this is from a company or is it stock?? https://gyazo.com/f9c1850bc0d05bc03fa2deacb7eba4a2 (https://gyazo.com/f9c1850bc0d05bc03fa2deacb7eba4a2) Title: Re: b5 s4 failing flash Post by: dilly on June 27, 2019, 12:39:07 PM LOUD NOISES guys relax this has all been helpful and reasonable info. Personally i did not know all the me7.1 2.7 ecu's can be crossflashed. i found a spare A box in my trunk that had a normal 800bb chip on the board and i flashed a m box file and recoded cluster to iirc 1027 and now i have a tach and no powertrain errors. no need to try and rip each other a new one bois thank you all for the support. i will most likely be needing more as i will make a new topic about deleting a pcode unless i find one already posted btw here is what the inside of my h box looked like i assume this is from a company or is it stock?? https://gyazo.com/f9c1850bc0d05bc03fa2deacb7eba4a2 (https://gyazo.com/f9c1850bc0d05bc03fa2deacb7eba4a2) Title: Re: b5 s4 failing flash Post by: IamwhoIam on June 27, 2019, 01:35:44 PM btw here is what the inside of my h box looked like i assume this is from a company or is it stock?? https://gyazo.com/f9c1850bc0d05bc03fa2deacb7eba4a2 (https://gyazo.com/f9c1850bc0d05bc03fa2deacb7eba4a2) APR EMCS Title: Re: b5 s4 failing flash Post by: dilly on June 27, 2019, 01:40:19 PM APR EMCS interesting. car ran like shit with that ecu lol. i am ssuming it is some what of a stage one tune from apr. worth anything? flashed the community stage 1 until i get everything sorted with inspection and car runs good Title: Re: b5 s4 failing flash Post by: nyet on June 27, 2019, 10:16:29 PM interesting. car ran like shit with that ecu lol. i am ssuming it is some what of a stage one tune from apr. worth anything? flashed the community stage 1 until i get everything sorted with inspection and car runs good No. You can't flash over it unless you desolder and put in a normal flash. You should have started with looking at the ECU first before doing anything. Title: Re: b5 s4 failing flash Post by: dilly on June 28, 2019, 12:36:10 AM No. You can't flash over it unless you desolder and put in a normal flash. You should have started with looking at the ECU first before doing anything. sorry idk if i forgot to mention i found an A-box in the trunk with a normal flash. the a box i found is the one i put the stage 1 file on for the mean time. h box with apr chip is out of the car and no longer in use. car didn't run well with it so i am just going to get rid of it. Title: Re: b5 s4 failing flash Post by: prj on June 28, 2019, 12:39:25 AM The hell you are on about ? I said use a flash or anything that has the most support aka damos etc available. No, he asked which box a.k.a which hardware he should buy.To which you replied "which has most support available" - because you had no idea until now, that all ME7.1 with the same chip inside are crossflashable. God you're stupid and loud. The first part is OK, the 2nd part gets on my nerves. Title: Re: b5 s4 failing flash Post by: Blazius on June 28, 2019, 03:44:54 AM No, he asked which box a.k.a which hardware he should buy. To which you replied "which has most support available" - because you had no idea until now, that all ME7.1 with the same chip inside are crossflashable. God you're stupid and loud. The first part is OK, the 2nd part gets on my nerves. Why do you think I didnt know I didnt know me7.1s are crossflashable? It is stated multiple times in the s4wiki too, that you can crossflash them and recode and you are good to go. Why is it so hard to understand what I meant, he understood me perfectly, only you didnt, because you seem to have hardon for me or something. It is a fact that you cannot post straight help without adding a bit of an attitude to it, its bloody annoying. Also what 2nd part you talking about ? Somebody calling you out on your bullcrap? Multiple people think the same way, they just wont post it cause reasons. I wont, I am not the person to go around "hiding" things, If i say these things , they are said because I feel like so. or is this hidden attitude coming from the fact that I didnt use your services to "patch" my "load" on my project? Honestly I dont know. Anyway, what you or I said is irrelevant , since OP didnt even check if he's running a stock ecu / chip or not. edit: actually, you seem to have helped some guys in that edc17 thread without an attitude. Nice job. Title: Re: b5 s4 failing flash Post by: prj on June 28, 2019, 05:27:04 AM Just so you understand.
You are no one to tell me anything. Your "contribution" on here is mostly useless postcount bolstering. You have something to say about everything, especially things you have absolutely no clue about. Sifting through this place becomes harder and harder with spammers like you. IDGAF what you or some other monkey thinks about me. I do care when people post BS on a technical forum. Title: Re: b5 s4 failing flash Post by: Blazius on June 28, 2019, 12:19:57 PM Just so you understand. You are no one to tell me anything. Your "contribution" on here is mostly useless postcount bolstering. You have something to say about everything, especially things you have absolutely no clue about. Sifting through this place becomes harder and harder with spammers like you. IDGAF what you or some other monkey thinks about me. I do care when people post BS on a technical forum. See this is exactly the issue with you. Sure you have contributed to this forum , but doesnt make you a god, are you that egoistical to understand that? You contribute to this forum because you want to, not to bring up later, "look how much I helped guys"... I dont even care about my postcounts lmao, where the fuck did I bolster about it. about 200-300 of my posts are for my own threads and stuff. The fact that you even bring that up is astonishing , says a lot. Back to thread , what Ive said most definetly applies. OP understood, you didnt. and its not bullshit. Back to you, honestly mate, I would take 100 Marty's , nyets , or 360strev's and others over you and your contributions. Also you can probably never come close to Daz ( RIP) , I can only read his posts , but you will never be able to come anywhere close to him, even if you did contribute more in programming software or other stuff.I am not saying you want to, I am just saying , because you seem to think you are the most useful, and "helpful" member of this board ::) jesus ... Whatever , I am done, reset with you honestly. Title: Re: b5 s4 failing flash Post by: IamwhoIam on June 29, 2019, 02:23:42 AM I need more popcorn
Title: Re: b5 s4 failing flash Post by: Blazius on June 29, 2019, 04:11:44 AM I need more popcorn Nah Im done :D I wonder what OP is doing now that he found out he doesnt even have a stock ecu. Title: Re: b5 s4 failing flash Post by: dilly on June 29, 2019, 07:04:14 PM Nah Im done :D I wonder what OP is doing now that he found out he doesnt even have a stock ecu. that modded ecu is now sitting next to me on my desk lolthe stock spare i found is now in the car doing its thing |