|
Title: ME7L and EngineLoad (rl) Post by: FlyboyS4 on March 06, 2012, 08:06:29 PM I'm logging EngineLoad (rl) and have observed that ME7L reports values with a ceiling of 191.25, so why when I log EngineLoad with ECU Explorer are values above 191.25 showing?
With ECU Explorer EngineLoad values will reach ~220 and show a curve, but with ME7L all I get is a flat line at 191.25 I'm using a config file based on the markp config. Title: Re: ME7L and EngineLoad (rl) Post by: phila_dot on March 06, 2012, 08:29:27 PM Try rl_w
Title: Re: ME7L and EngineLoad (rl) Post by: nyet on March 06, 2012, 10:59:17 PM if available, always use the _w variants ... they're 16 vs 8 bit
Title: Re: ME7L and EngineLoad (rl) Post by: FlyboyS4 on March 07, 2012, 04:47:56 PM Thanks for the suggestions, adding the _w did the trick.
|