|
Title: Questions about AUDI TT DashBoard. Post by: doddony on July 16, 2019, 03:50:32 AM Hi I got an audi TT EU MK1 dashboard (or instrument) which is not responding at all.
At the beginning the fuel gauge was the only issue. Then when I re soldered all the solder point inside, the main display goes off and never came back I think it is because the soldering iron was defective and have ~AC 12V on the tip (not mine :-\) Small display on both sides working (and show date/time and km) but the center display is full off. When the dashboard is inside the car the IMMO is working. The car engine can start but RPM gauge not moving. (It does before) When I'm testing the dash with my VAG-COM the center display can goes FULL black but that's all. And no gauges is moving. I have ordered the main screen, and the little chip who drivings small gauges motors. I 'would like to make a copy of the IMMO data before touching anything more. And I have ordered another Dash board (Part number are not the same) to have supply parts and try to transfer data inside. Which are my better options from what you think ? Many thanks in advance for any help ! NB : as I said in my description, I'm electronics engineer, so I know how stuffs works and I can do things, but I'm not a professional in car electronics (Immo, ECU, cluster... ) Title: Re: Questions about AUDI TT DashBoard. Post by: doddony on July 19, 2019, 01:58:49 AM Hi,
I bought a VAG-tacho. Do you think I can make an memory dump from dashboard to an other ? Alternative, could i reconfigure a used dashboard to be compatible with this car ? with VAG-tacho, it seems i can find pin code and with VAG-com I can configure it ? Thank you in advance for you support ! Any help would be much appreciated Title: Re: Questions about AUDI TT DashBoard. Post by: BlackT on July 19, 2019, 06:10:05 AM If you can find pin you can adapt used cluster in your car with VCDS
Title: Re: Questions about AUDI TT DashBoard. Post by: doddony on July 19, 2019, 07:06:12 AM Hi, thanks for your reply !
I'm still waiting for the used instrument but as soon I got it i'll try to get the pin code of this one. And after try the same process ton ton used one (still working but in bad condition !) I read that I need the key to get the pin code. Does it still true ? :-[ Title: Re: Questions about AUDI TT DashBoard. Post by: BlackT on July 19, 2019, 02:35:57 PM No you don't need key to get pin code. Only cable and program for read EEPROM
Title: Re: Questions about AUDI TT DashBoard. Post by: doddony on July 19, 2019, 11:11:12 PM thank you for your reply ! I hope i'll can do this without trouble !
As soon as I get result i'll post here ! Title: Re: Questions about AUDI TT DashBoard. Post by: doddony on July 21, 2019, 07:00:11 AM Sorry but with i can not read eeprom of the dashboard with VAG-tacho and .
I have my cable and the software vag-tacho 5.0 under windows XP. with autoconnect to Any Tacho button the software find my dashboard. But Read EE Prom is still grayed. Thank you in advance for any help ! |