|
Title: Our project corrado 1.8T Post by: janne on March 08, 2012, 12:46:06 AM Feel free to see our progress in our facebook profile.
http://www.facebook.com/#!/pages/Powerbyte/185673858110997 Title: Re: Our project corrado 1.8T Post by: carlossus on March 08, 2012, 06:09:35 AM I can't check this (FB) at work, but I have been craving a 1.8T Corrado for ages! Looking forward to seeing your work.
Title: Re: Our project corrado 1.8T Post by: janne on March 08, 2012, 06:32:04 AM Actually I swap engine 3 years ago, but now I built new engine whit franken f23 and new internals.
Can will get new paint etc. I try to update project soon. Title: Re: Our project corrado 1.8T Post by: carlossus on March 08, 2012, 02:28:08 PM No pics of the car, boo.
Title: Re: Our project corrado 1.8T Post by: janne on March 09, 2012, 02:03:05 AM I try to add today
Title: Re: Our project corrado 1.8T Post by: Nottingham on March 11, 2012, 08:31:26 AM The base engine you are using is AUM, right?
Any idea what kind of torque was required to bend the stock rod in this case? Those IE rods look somewhat beefy compared to the standard ones ;D Title: Re: Our project corrado 1.8T Post by: janne on March 12, 2012, 05:53:01 AM Yes it is aum.
06A engines "new" ones needs about 400 nm@4000rpm to bent rods. 058 "old" ones need about 420nm to kill rods. |