|
Title: Charge limitation based on gear? Post by: masterj on March 09, 2012, 04:20:50 PM Hello, folks! :)
Today I have another problem to share with you... IS there a map that limits charge (engine load) based on gear?? Because in first gear I have it limited to about 50%, in second ~70% and only in third gear I get full power... I would like to be able to achive 100% load in first AND second gear also... Looking for your input :) Thanks Title: Re: Charge limitation based on gear? Post by: createddeleted on March 09, 2012, 04:30:55 PM I don't know if there is. But If I can do boost by gear I would love it.
Title: Re: Charge limitation based on gear? Post by: masterj on March 09, 2012, 04:49:57 PM I think that there is some kind of protection in low gears or something...
Title: Re: Charge limitation based on gear? Post by: thom337 on March 09, 2012, 05:17:35 PM It is in the function docs that are posted on here that no one cares to read. ::)
The map is KFMDBGRG. It is active when motor temp is above TMMIBGR and vehicle speed is above VMIBGR. ;) Title: Re: Charge limitation based on gear? Post by: masterj on March 09, 2012, 05:47:23 PM It is in the function docs that are posted on here that no one cares to read. ::) The map is KFMDBGRG. It is active when motor temp is above TMMIBGR and vehicle speed is above VMIBGR. ;) Nice, thanks! Now I need someone to help me identify these maps... Am I correct thinking that KFMDBGRG is at 1FB4A ? If it is true then this doesn't limit anything in my bin (FFs in whole table) Also it would be really nice if someone could find the other maps of MDBGRG 5.30 in my bin file.... DMRTMKI KFMDBGRG KLFRTMKI MDBGRGA MKBRMXWP TMMIBGR VMIBGR VMKBRMX Title: Re: Charge limitation based on gear? Post by: gremlin on March 10, 2012, 05:35:36 PM Also it would be really nice if someone could find the other maps of MDBGRG 5.30 in my bin file.... Title: Re: Charge limitation based on gear? Post by: masterj on March 11, 2012, 05:52:09 AM Thanks, Could you save this ols file as 1.226 version and attach it to this topic? :) Title: Re: Charge limitation based on gear? Post by: gremlin on March 11, 2012, 06:56:52 AM Thanks, Could you save this ols file as 1.226 version and attach it to this topic? :) Whole ols is on the screen :) This ols was done especially for your question and it have 8 lines... Title: Re: Charge limitation based on gear? Post by: masterj on March 11, 2012, 08:33:32 AM Whole ols is on the screen :) This ols was done especially for your question and it have 8 lines... Oh, thanks! So which ols you have used to compare the maps? Or did you open my bin in dissassembler? :) Title: Re: Charge limitation based on gear? Post by: masterj on March 12, 2012, 03:19:49 PM Also maybe someone could tell me more details about MDBGRGA map, because in ols files that I have this map doesn't exist... I need its size; factor; axes; units; 8/16bit...
Thanks :) Title: Re: Charge limitation based on gear? Post by: gremlin on March 12, 2012, 03:34:29 PM about MDBGRGA map, because in ols files that I have this map doesn't exist... ???? And what you see above in my ols??? Momentbegrenzung fur Luftpfad is MDBGRGA Title: Re: Charge limitation based on gear? Post by: masterj on March 12, 2012, 03:36:01 PM ???? And what you see above in my ols??? Momentbegrenzung fur Luftpfad is MDBGRGA Yes I know that, but from that picture I can see only location... My other reference ols files and map packs doesn't include this map, so I don't know it's factor; axes, etc... :) Title: Re: Charge limitation based on gear? Post by: gremlin on March 12, 2012, 04:21:17 PM so I don't know it's factor; axes, etc... :) 16bit 8x1 mapmi(%)=f(gangi) In your file it's a flat line = 100% Title: Re: Charge limitation based on gear? Post by: masterj on March 12, 2012, 04:48:01 PM 16bit 8x1 map mi(%)=f(gangi) In your file it's a flat line = 100% Thank you :) Is gangi (gear) imported from the file (from address) or generated on the fly? P.S> What is the difference between KFMDBGRG and MDBGRGA? I see that both of them limits torque.. Title: Re: Charge limitation based on gear? Post by: gremlin on March 13, 2012, 05:59:19 AM Thank you :) Is gangi (gear) imported from the file (from address) or generated on the fly? P.S> What is the difference between KFMDBGRG and MDBGRGA? I see that both of them limits torque.. Gangi-axis is calculated axis in MDBGRGA The difference: KFMDBGRG - active only for car speed and tmot conditions described above in this thread. MDBGRGA - operate always. Title: Re: Charge limitation based on gear? Post by: masterj on March 13, 2012, 06:18:00 AM Gangi-axis is calculated axis in MDBGRGA The difference: KFMDBGRG - active only for car speed and tmot conditions described above in this thread. MDBGRGA - operate always. Thank you, now I've defined this whole section :) Title: Re: Charge limitation based on gear? Post by: Gonzo on April 08, 2012, 06:23:07 PM Interesting.
|